Try setting the "Static" property of the flash member to "true"
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Alex Macleod
Sent: Monday, August 20, 2001 9:35 AM
To: [EMAIL PROTECTED]
Subject: Re: <lingo-l> tight situation>>PLEASE HELP
thanks chris,
I have tried this to no avail :(
I'm desperately trying to salvage my work is there anything else i could
try??
Thanks
Alex MacLeod
----------
>From: "Chris Aernoudt" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Subject: Re: <lingo-l> tight situation>>PLEASE HELP
>Date: Mon, Aug 20, 2001, 11:58 am
>
> try turning off "direct to stage" in the prop. inspector for yer QT &
> flashies
> ----- Original Message -----
> From: "Alex Macleod" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Monday, August 20, 2001 2:34 PM
> Subject: <lingo-l> tight situation>>PLEASE HELP
>
>
>> Firstly,
>> Hi, this is my first posting and hope that you are fine and the weekend
>> hangovers are'nt too bad.
>>
>> I have a BIG problem, I have a flash interface and have been building it
> for
>> a couple of weeks now and have putting a lot of time and effort into
> making
>> it. I have used director a few times before but I am by no means an
> expert.
>> I wanted to include some quicktime videos in the piece to play over the
>> flash stuff...... but its all gone pear shaped. The QT movies are
> flickering
>> really badly and this is BAD. I really need a fix to stop them doing this
>> but I have been exhausting myself to find one to no avail.
>> If anyone can point me the right way I would be VERY apprieciative .
>>
>> Sorry for the desperate post, but I am scared of losing weeks of work to
a
>> technical hitch......
>>
>> Thank you
>> Regards
>> Alex MacLeod
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED])
Lingo-L is for learning and helping with programming Lingo. Thanks!]
