Hmm. Can I recommend that you _not_ do it this way? You are way too subject to network errors that will result in having to restart the process. You'll probably wind up having to re-download the distribution many times. You would be much better off to find some free space (1.4GB excluding the SRPMS) on an FTP server somewhere in your shop. (Any kind will do nicely, including a Windows one.) Or, if you have it available, an NFS server.
Mark Post -----Original Message----- From: Chet Norris [mailto:chet10719@;yahoo.com] Sent: Tuesday, October 22, 2002 2:33 PM To: [EMAIL PROTECTED] Subject: Re: RHSETUP and LOADER Fails I'm pointing to RedHat mirror sites from a new system and I'm only running kernel.img and initrd.img, which were booted from the VM reader. I don't have a md5sum command. The only s390 directory is the one I'm FTP'ing from. --- "Post, Mark K" <[EMAIL PROTECTED]> wrote: > Chet, > > Check the md5 sums on the files in the s390/RedHat/base directory > md5sum -c MD5SUM > > Note that if you have the most current files, that hdlist and hdlist2 > will > fail the check, since they were apparently updated after the MD5SUM > file was > created. The sums I have for those files are: > da08ed9f6b3071fd6361e9eb1fc370f9 hdlist > 31bbfea4b72c2e25b4c57f8226cd3ac5 hdlist2 > > -rw-r--r-- 1 markp users 1457332 Sep 20 11:46 hdlist > -rw-r--r-- 1 markp users 13438708 Sep 20 11:32 hdlist2 > > Mark Post > > -----Original Message----- > From: Chet Norris [mailto:chet10719@;yahoo.com] > Sent: Monday, October 21, 2002 2:44 PM > To: [EMAIL PROTECTED] > Subject: RHSETUP and LOADER Fails > > > The same thing happens with LOADER: > # ifconfig iucv0 > > iucv0 Link encap:Serial Line IP > > inet addr:162.130.6.225 P-t-P:10.10.10.10 Mask:255.255.255.255 > > UP POINTOPOINT RUNNING NOARP MTU:1492 Metric:1 > RX packets:6091 errors:0 dropped:0 overruns:0 frame:0 > TX packets:3270 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:27 > RX bytes:8337934 (7.9 Mb) TX bytes:152356 (148.7Kb) > > > lqqqqqqqqqqqqu FTP tqqqqqqqqqqqqqk > x x > x Unable to retrieve the first x > x install image x > x x > x lqqqqk x > x x OK x x > x mqqqqj x > x x > x x > mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj > > --- Chet Norris <[EMAIL PROTECTED]> wrote: > > I've tried many times to get a Redhat 7.2 system downloaded into my > > z/VM 4.3 system. I have IUCV configured and it seems to be working > > fine. When I run RHSETUP it starts the download for the Ramdisk and > > runs for a long time. I watch it by entering ifconfig iucv0 > commands > > and it runs until it has transmitted 7.6MB (the size of the > > netstg1.img > > file) and then fails. I see no messages anywhere other than > "Download > > of FTP:..... failed" followed by "Stopped installation. No cleanup > is > > done.". It seems like it can't write the directory information onto > > the > > dasd. Any suggestions? > > > > ===== > > Chet Norris > > Marriott International,Inc. > > > > __________________________________________________ > > Do you Yahoo!? > > Faith Hill - Exclusive Performances, Videos & More > > http://faith.yahoo.com > > > > > ===== > Chet Norris > Marriott International,Inc. > > __________________________________________________ > Do you Yahoo!? > Y! Web Hosting - Let the expert host your web site > http://webhosting.yahoo.com/ ===== Chet Norris Marriott International,Inc. __________________________________________________ Do you Yahoo!? Y! Web Hosting - Let the expert host your web site http://webhosting.yahoo.com/
