Swapping the order of qeth-1 and add_parms doesn't change it.
cat /etc/chandev.conf
chandev=noauto
lcs-1,0x3ad0,0x3ad1,0,3
qeth-1,0x0e04,0xe05,0x0e06,0,0
add_parms,0x10,0x0e04,0x0e06,portname:VMLAN01
Q NIC DETAILS
Adapter 0E04 Type: QDIO Name: UNASSIGNED Devices: 3
Port 0 MAC: 00-04-AC-00-00-0B LAN: SYSTEM VMLAN01 MFS: 8192
RX Packets: 0 Discarded: 0 Errors: 0
TX Packets: 0 Discarded: 0 Errors: 0
RX Bytes: 0 TX Bytes: 0
Connection Name: HALLOLE State: CM_CONNECT
Device: 0E04 Unit: 000 Role: CTL-READ
Device: 0E05 Unit: 001 Role: CTL-WRITE
Device: 0E06 Unit: 002 Role: DATA
Q LAN VMLAN01 DETAILS
LAN SYSTEM VMLAN01 Type: QDIO Active: 1 MAXCONN: 32
PERSISTENT RESTRICTED MFS: 8192 ACCOUNTING: ON
Authorized userids:
LNXRHFW LNXRH00 LNXRH01 LNXRH02 LNXRH03 LNXRH04
LNXRH05
Adapter Owner: LNXRHFW NIC: 0E04 Name: UNASSIGNED
cat /proc/chandev
chan_type key bitfield
ctc=0x1,escon=0x2,lcs=0x4,osad=0x8,qeth=0x10,claw=0x20
*'s for cu/dev type/models indicate don't cares
cautious_auto_detect: on
persist = 0x00
use_devno_names: off
Channels enabled for detection
chan cu cu dev dev max checksum use hw auto
recovery
type type model type model port_no. received stats type
============================================================================
==
0x02 0x3088 0x1e * * 0 no no
not_operational,no_path,revalidate,device_gone
0x20 0x3088 0x61 * * 0 no no
not_operational,no_path,revalidate,device_gone
0x08 0x3088 0x62 * * 0 no no
not_operational,no_path,revalidate,device_gone
0x10 0x1731 0x05 0x1732 0x05 0 no no
not_operational,no_path,revalidate,device_gone
0x10 0x1731 0x01 0x1732 0x01 0 no no
not_operational,no_path,revalidate,device_gone
0x04 0x3088 0x60 * * 1 no no
not_operational,no_path,revalidate,device_gone
0x06 0x3088 0x1f * * 15 no no
not_operational,no_path,revalidate,device_gone
0x05 0x3088 0x08 * * 15 no no
not_operational,no_path,revalidate,device_gone
0x04 0x3088 0x01 * * 15 no no
not_operational,no_path,revalidate,device_gone
Registered probe functions
probefunc shutdownfunc msck_notfunc chan devices devices
type found active
===============================================================
0x028a4ffc 0x028a537c 0x028a53f4 0x04 1 1
Initialised Devices
read write data read write data chan port dev dev
memory read msck write msck data msck
irq irq irq devno devno devno type no. ptr name
usage(k) status status status
============================================================================
=========================================
0x0000 0x0001 n/a 0x3ad0 0x3ad1 n/a 0x04 2 0x01d17800 eth0
320 good good not applicable
Total device memory usage 320k.
channels detected
chan cu cu dev dev in
chandev
irq devno type type model type model pim chpids use
reg.
============================================================================
===
0x0000 0x3ad0 0x04 0x3088 0x01 0x0000 0x00 0x80 0x3affffffffffffff yes
yes
0x0001 0x3ad1 0x04 0x3088 0x01 0x0000 0x00 0x80 0x3affffffffffffff yes
yes
0x0006 0x0e04 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0200000000000000 no
no
0x0007 0x0e05 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0200000000000000 no
no
0x0008 0x0e06 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0200000000000000 no
no
/Thomas Kern
/301-903-2211
> -----Original Message-----
> From: Post, Mark K [mailto:[EMAIL PROTECTED]
> Sent: Friday, April 02, 2004 12:28
> To: [EMAIL PROTECTED]
> Subject: Re: Adding QDIO guest lan to server
>
> I believe that the order of the cards in /etc/chandev.conf is
> significant.
> I've always seen it coded this way:
> # cat /etc/chandev.conf
> qeth0,0x0f10,0x0f11,0x0f12
> add_parms,0x010,0x0f10,0x0f12,portname:LINUXSRV
>
> The "qeth" statement first, followed by the add_parms for that device.
>
> -----Original Message-----
> From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On
> Behalf Of Rich
> Smrcina
> Sent: Friday, April 02, 2004 12:20 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Adding QDIO guest lan to server
>
> It indicates that the portname is wrong. Verify the port
> name with Q LAN
> DETAILS.
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
