On an MP3000-H50, which chpid is used by the virtual QDIO nic that I define for a virtual machine?
I have 3 persistant LANs defined, VMLAN00, VMLAN01, VMLAN02. VMLAN00 is meant as a backbone connection between VM, OS/390, and 2 separate linux firewall servers. Each firewall server will then connect to a different guest lan, VMLAN01 for our inside work and VMLAN02 for the outside work. All of the NICs attached to the VMLAN00 lan are address E00-E02 with Portname VMLAN00, except for the OS/390 NIC at address E000-E002, portname IUTIQDE0. I have an outside webserver connected to VMLAN02 using NIC address E00-E02 portname VMLAN02. Now I am trying to connect a server to a 3172 and the VMLAN01 at the same time. I have tried NICs defined at D04, E04, F04, and changed the portname. I get the same error. If I completely remove the 3172 connection (from /etc/chandev.conf, /etc/modules.conf and detach the devices) then the QETH/QDIO driver connects to the VMLAN01 lan just fine. /Thomas Kern /301-903-2211 > -----Original Message----- > From: Alan Altmark [mailto:[EMAIL PROTECTED] > Sent: Friday, April 02, 2004 13:58 > To: [EMAIL PROTECTED] > Subject: Re: Adding QDIO guest lan to server > > IDX TERMINATE code 0x22 means that the portname specified > conflicts with a > portname already set in the adapter by another active > subchannel on the > same chpid. > > Alan Altmark > Sr. Software Engineer > IBM z/VM Development ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
