Hi, I am now trying to install SLES9.
My system has an OSA Express 1000Base-T which is configured using these IOCP statements: CHPID PATH=(CSS(0),02),SHARED, * PARTITION=((LINTST,PROD,TEST),(=)),TYPE=OSE, * PCHID=141 CNTLUNIT CUNUMBR=1200,PATH=((CSS(0),02)),UNIT=OSA IODEVICE ADDRESS=(1200,253),CUNUMBR=(1200),UNIT=OSA IODEVICE ADDRESS=(12FE,1),CUNUMBR=(1200),UNIT=OSAD When I started the installation from the CD, I chose option 10 and listed all of the devices that linux knew about. I saw all of my dasd (devices 800-9ff) and device 1200,1201 and 12fe. Devices 1200 and 1201 were defined as 3088/60 and 12fe as 3088/62. I went back to the main menu and chose option 2 (Ethernet OSA). (This worked in SLES8). I entered my first device address (1200) and waited. The message that came up said: Lcs: loading LCS driver ($ Revision: 1.72.2.4 $/$ Revision 1.15.2.2 $) And it's been like that for quite a while. What am I doing wrong? Suggestions I received: 1. Try option 3 - this did not work. 2. Issue the dmesg command to look for more information - How do I interrupt the configuration script so I can issue commands. I am trying to install SLES9 in an LPAR. I do not have VM available. Gadi ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390