No maintenance on SLES 8? I think you'll need some. If I recall correctly, I couldn't get guest lan to work without some service. I can't remember the details of what it was but I remember Jeremy Warren had the same problems... if that helps...
Marcy Cortes "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Martha McConaghy Sent: Friday, December 10, 2004 12:01 PM To: [EMAIL PROTECTED] Subject: [LINUX-390] SLES 8 and Vswitch I'm trying to get my SLES 8 system to talk to a Vswitch on VM (type QDIO), but am having no luck. The Suse system will not autodetect the device, and I can't seem to get Yast to define it correctly. Any ideas why it isn't autodetecting? (This is Suse straight off the CD, I don't know enough yet to get fancy.) What type of device should the QDIO lan be? My hipersocket guest lans are normally hsi0, I don't usually use qdio. Martha - banging my head on the Linux wall, once again.... ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
