We have two /28 subnet ranges that we use on two separate OSA cards. The subnet ranges are being changed to /26 and the Linux machines we have on these OSA cards will now all be part of the same subnet range.
We would like to keep the IP addresses - I can change the IP address, subnet mask etc with ifconfig and route commands. My questions is that at install time I was asked for a OSA Portname. Will this have to change before I can get the network working? If so, is there a way I can dynamically change it like I can with ifconfig for the IP address . Thanks. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390