I have found various threads about using NED on a 3270 console to zLinux and I thought this was a good idea. I read the 3270 HOWTO on linuxvm.org but it seemed no longer relevant to recent kernels; I am running 2.6.26. I have no tub3270 module so there is nothing under /proc/tty/drivers and so config3270.sh just exits. I had a read of the device drivers manual but am not sure what I need.
I have a 3270 defined at 001f which gives me: # ll /sys/bus/ccw/drivers/3270 total 0 lrwxrwxrwx 1 root root 0 Aug 8 13:37 0.0.001f -> ../../../../devices/css0/0.0.0000/0.0.001f --w------- 1 root root 4096 Aug 8 13:37 bind --w------- 1 root root 4096 Aug 8 13:21 uevent --w------- 1 root root 4096 Aug 8 13:37 unbind but there are no tty devices. What do I do next? TIA -Robin -- ---------------------------------------------------------------------- Robin Atwood. "Ship me somewheres east of Suez, where the best is like the worst, Where there ain't no Ten Commandments an' a man can raise a thirst" from "Mandalay" by Rudyard Kipling ---------------------------------------------------------------------- ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390