Thanks Marcy and Mark,
Marcy's fix did the trick. Now, onto making a new herd of penguins. George Shedlock Jr AEGON Information Technology AEGON USA 502-560-3541 -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Mark Post Sent: Tuesday, November 18, 2008 3:04 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Install problem with SLES 10 on Vswitch >>> On 11/18/2008 at 2:06 PM, "Shedlock, George" <[EMAIL PROTECTED]> wrote: -snip- > Previous posts seemed to indicate that there was a mis-match in > layer=2 vs non layer=2. I have confirmed that we are running with layer=2. The appliance is not set up to work with Layer 2 VSWITCHes by default. Follow Marcy's advice to change that, or couple the NIC to a Layer 3 VSWITCH. Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390