zVPS also provides the LPAR data, in addition to a lot of other information from the CP Monitor, Linux, VSE, and z/OS.
Rich Smrcina Sr. Systems Engineer Velocity Software Inc. Main: (650) 964-8867 Main: (877) 964-8867 r...@velocitysoftware.com <mailto:r...@velocitysoftware.com> > On Jul 1, 2022, at 11:21 AM, Mark Post <mp...@suse.com> wrote: > > On 7/1/22 11:59, Frank M. Ramaekers wrote: >> mount helped, still don't see any LPAR information. > > As Alan stated, for a z/VM guest, that will only be accessible via the > CP Monitor data. You can do that from Linux, but it's going to be raw > monitor data, i.e., binary format, that you would then need to decode, > perform calculations, etc. Given that IBM's PERFMON is pretty darn cheap > (at least the last time I looked), you might want to use that instead of > trying to write your own. > > > Mark Post > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit > http://www2.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www2.marist.edu/htbin/wlvindex?LINUX-390