Philip,
I compiled the 2.2.6 kernel successfully from the tools built from the
info on Bluewaternz.com. I have the binutils-2.9.1 and egs-1.1.2 (gcc
2.91.66). Seeing that the support for the CLPS7500FE is supported in
the 2.4.0-test6 kernel (it is in the config menu!), I decided to build
that kernel... It failed with:
#####################################################
arm-linux-gcc -D__KERNEL__ -I/home/arm/linux-2.4.0-test6/linux/include
-Wall -Wstrict-prototypes -O2 -pipe -msoft-float -mshort-load-bytes
-march=armv3 -mtune=arm7 -fno-strict-aliasing -c -o init/main.o
init/main.c
/home/arm/linux-2.4.0-test6/linux/include/asm/current.h: In function
`start_kernel':
/home/arm/linux-2.4.0-test6/linux/include/asm/current.h:12: warning:
`sp' might be used uninitialized in this function
/home/arm/linux-2.4.0-test6/linux/include/asm/current.h: In function
`do_basic_setup':
/home/arm/linux-2.4.0-test6/linux/include/asm/current.h:12: warning:
`sp' might be used uninitialized in this function
{standard input}: Assembler messages:
{standard input}:1073: Error: Bad arguments to instruction
make: *** [init/main.o] Error 1
#####################################################
Now... Before I go throught that pain & suffering again, ;-), what
binutils & gcc version are you using? I expect that this is my problem,
my utilities are out of date?
TIA,
TomW
--
Tom Walsh - WN3L - Embedded Systems Consultant
'www.openhardware.net', 'www.cyberiansoftware.com'
"Windows? No thanks, I have work to do..."
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
