Richard Vaughan wrote:
>
> Ok,
>
> Diald seems to be running ok from the machine I configured it on. However.
> I'm having trouble setting up another Linux box to connect through it.
>
> The second machine is running DNS, Sendmail, and SQUID, and is the box I
> normally surf the net through (from a third machine!). I've set the machines
> gateway to point at the new box, but it doesn't seem to force the connection
> up.
>
> I inlcuded a dump of the route command from this machine, in case that's any
> use to anyone. This machine is also a Red Hat box, but it's a 5.1 release
> (not 5.2).
>
> What am I missing?
Try doing some tcpdumps on the gateway machine:
# tcpdump -i eth0 host <ip-of-dns-squid-box>
and then try surfing or telneting to see if the packets are going to the
right place.
Turn on debug 1 in diald, this should show any rules accepted or ignored in
a log file. It depends on your configuration which log file but try
/var/log/messages or /var/log/diald????
>
> Richard
>
> --------------------------------------------------------------------------------
> Name: route
> route Type: unspecified type (application/octet-stream)
> Encoding: quoted-printable
--
-------------------------------------------------------------------------------
Rodney D. Holm [EMAIL PROTECTED]
Apexx Technology, Inc. http://www.apexxtech.com
-------------------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
