Hey everyone, I seem to be stuck. I just switched ISPs, previously, I had
diald working correctly. At the new ISP, I have a static ip (oh boy).
I can connect using chat-ppp0 normally, but I can't get diald to connect using
it. I'm running diald 99.4, redhat 6.0,
2.2.14 (usb backport). Here is my config file.
mode ppp
connect "/usr/sbin/chat -f /etc/sysconfig/network-scripts/chat-ppp0"
device /dev/ttyS0
speed 115200
modem
lock
crtscts
local 204.251.91.204
remote 205.240.74.3
defaultroute
include /usr/lib/diald/standard.filter
fifo /etc/diald/diald.ctl
And here are the logs I'm seeing.
Mar 22 17:24:50 redhawk diald: diald startup succeeded
Mar 22 17:24:50 redhawk modprobe: can't locate module tap0 --> tap15
Mar 22 17:24:51 redhawk diald[3345]: start sl0: SIOCSIFMETRIC: Operation not supported
Mar 22 17:25:47 redhawk diald[3345]: Calling site 205.240.74.3
Mar 22 17:26:21 redhawk diald[3345]: Connected to site 205.240.74.3
Mar 22 17:26:21 redhawk diald[3345]: Running pppd (pid = 3374).
Mar 22 17:26:22 redhawk pppd[3374]: pppd 2.3.7 started by root, uid 0
Mar 22 17:26:22 redhawk pppd[3374]: Using interface ppp1
Mar 22 17:26:22 redhawk pppd[3374]: Connect: ppp1 <--> /dev/ttyS0
Mar 22 17:26:25 redhawk modprobe: can't locate module ppp-compress-21
Mar 22 17:26:25 redhawk modprobe: can't locate module ppp-compress-26
Mar 22 17:26:25 redhawk modprobe: can't locate module ppp-compress-24
Mar 22 17:26:29 redhawk pppd[3374]: local IP address 198.124.97.210
#
# The local address is incorrect, 198.124.97.210 is from my ethernet card
# , which is turned off. I'm not sure where it's getting this. It should
# be 204.251.91.204. And it get's the correct ip when I just run the chat script
Mar 22 17:26:29 redhawk pppd[3374]: remote IP address 205.240.74.3
Mar 22 17:26:29 redhawk modprobe: can't locate module ppp-compress-21
Mar 22 17:26:29 redhawk modprobe: can't locate module ppp-compress-26
Mar 22 17:26:29 redhawk modprobe: can't locate module ppp-compress-24
Mar 22 17:26:29 redhawk pppd[3374]: IPCP terminated by peer
Mar 22 17:26:30 redhawk pppd[3374]: LCP terminated by peer
Mar 22 17:26:33 redhawk pppd[3374]: Connection terminated.
Mar 22 17:26:33 redhawk pppd[3374]: Connect time 0.2 minutes.
Mar 22 17:26:33 redhawk pppd[3374]: Sent 269 bytes, received 370 bytes.
Mar 22 17:26:33 redhawk pppd[3374]: Exit.
Mar 22 17:26:33 redhawk diald[3345]: start sl0: SIOCSIFMETRIC: Operation not supported
Mar 22 17:26:33 redhawk diald[3345]: start sl0: SIOCADDRT: File exists
Mar 22 17:26:33 redhawk diald[3345]: start sl0: SIOCDELRT: No such process
Mar 22 17:26:33 redhawk diald[3345]: start sl0: SIOCADDRT: File exists
Mar 22 17:26:33 redhawk kernel: ppp: ppp1 not active
Mar 22 17:26:33 redhawk diald[3345]: stop ppp1: SIOCDELRT: No such process
Mar 22 17:26:33 redhawk diald[3345]: stop ppp1: SIOCSIFFLAGS: Device not configured
Mar 22 17:26:34 redhawk diald[3345]: Delaying 30 seconds before clear to dial.
While I'm asking, does anyone know why modprobe is freaking out? It did
it previous (and everything worked), but it would be nice not to happen.
I think I've got ppp built into the kernel (not a module).
Thanks in advanced...
Jeff
--
"Fear leads to anger. Anger leads to hate. Hate leads to using
Windows NT for mission-critical applications."
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
