Hello,
I can't seem to find any hardware problems. More info .?.
Grtz,
Ron !
2
----- Original Message -----
From: Kjell Jarl <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, August 23, 1999 8:17 PM
Subject: Re: strange behaviour txd.
> Hi!
> Is that on the scc card?
> I had problems under windows (uscc card), that the card was not preperly
> reset, and sometimes got hanged for 30 -60 seconds during operation
> (belive it was the hardware watchdog that stopped transmission) when I
> was using the keyborad, and/or some hard disk access was performed.
>
> I may still have a similar problem under linux (kernel 2.2.5) as I am
> getting frame rejects from my neighbour node from time to time (it may
> be that node as well having problems).
>
> Keyboard and HD interupts?
>
> I have lost the post about hdparm, will go to the archives, I'll try
> that.
>
> 73/Kjell sm7gvf
>
>
>
> > Ron Jochems wrote:
> >
> > Hello Fellow Hams,
> >
> > I've got the following strange thing.
> >
> > I've configured a basic ax25 system, attached to a scc card and a
> > baycom modem to this. This configuration works without problems in
> > dos, so the problem is configuration in the linux side.
> >
> > After some time working (aprox 5 min.) , my system will send a next
> > frame, and it will transmit for 1 (one!) minute. This should be only
> > some milisec.
> > After this happens, when i look in 'ifconfig' , he thinks it was 10
> > frames or so, but when listening to the signal , it looks like it has
> > a real long txtail.
> >
> > I've tried to solve this by changing parameters, but i can't seem to
> > find it.
> >
> >
> > What am i doing wrong, or is there someone familiar with this problem.
> >
> >
> > regards from the Netherlands,
> >
> > Ron Jochems
> > PD1ACF
> >
> >
> > M.I.C.R.O.S.O.F.T. : More Inteligent Customers are Realizing Our
> > Software is Only for Fools and Teenagers
