On 09-Jun-2001 Yedidya Bar-david wrote:
> 2. You should have in your /etc/sane.d/dll.conf a line '1200ub'. Do you?
no - but adding the line didn't help :-(
> 3. Does your kernel report anything when you attach your
scanner?
> Mine sends this:
> hub.c: USB new device connect on bus1/1, assigned device number 2
> usb.c: USB device 2 (vend/prod 0x55f/0x1) is not claimed by any active
> driver.
> usb.c: registered new driver usbscanner
> scanner.c: USB Scanner support registered.
I think the kernel does recognize the USB scanner support. Here's a part of
/var/log/messages after running insmod scanner:
Jun 9 20:50:20 shlomo1 kernel: usb.c: registered new driver usbscanner
Jun 9 20:50:20 shlomo1 kernel: scanner.c: USB Scanner support registered.
I also found the following in /var/log/syslog:
Jun 9 20:33:12 shlomo1 kernel: hub.c: USB new device connect on bus1/2,
assigned device number 10
Jun 9 20:33:12 shlomo1 kernel: usb.c: USB device 10 (vend/prod 0x5d8/0x4002)
is not claimed by any active driver
I think I may have found part of the problem, but don't know the solution. Look
at the following and notice that my USB printer is listed, but not the scanner.
Any ideas why?
[root@shlomo1 /root]# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04b8 ProdID=0005 Rev= 1.00
S: Manufacturer=EPSON
S: Product=USB Printer
S: SerialNumber=HK0120002171047350
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=05d8 ProdID=4002 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=496mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
//-------------------------
Shlomo Solomon
E-Mail: [EMAIL PROTECTED]
http://come.to/shlomo.solomon
Date: 09-Jun-2001 Time: 22:33:21
Message sent by XFMail on a LINUX Mandrake 8.0 machine
//-------------------------
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
