On Thu, Jul 24, 2003 at 05:15:00PM +0300, Geoffrey S. Mendelson wrote:
>
> You could also do it wit some routing tables, for example, I assume that
> you have network segment on a different subnet (shame on you if you didn't):
>
What do you mean by different subnet? What are the other options, why
he has to be shamed if this is not his setup and why would someone
choose the wrong setup?
> computer 1:
> 192.168.1.1
>
> computer 2
> 192.168.1.2 crossed to computer a 192.168.1.1
> 192.168.2.2 crossed to computer c 192.168.2.3
>
> computer 3
> 192.168.2.3 crossed to computer a 192.168.2.2
> 192.168.3.3 crossed to computer c 192.168.4.3
>
> computer 4
> 192.168.3.4 crossed to computer a 192.168.3.3
> 10.0.1.1. connected to aDSL modem.
> xx.xx.xx.xx ppp conection to isp.
>
> This could easily be accomdated with routing,
>
[ ... ]
>
> It would be easier to get a short cable and a "punch down" wall jack
> and make a 1 meter adaptor cable as needed. Cost about 50 NIS each.
>
Do you mean that the short cable would extend the length of the
current cable but this would only be a side effect for the fact that the
short cable will undo the crossing effect of the current cable? What
is a "punch down" wall jack? Is it the the other option of a fasteners
using wall jack?
--
Shaul Karl, [EMAIL PROTECTED] e t
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
