Hello,
> >I tested it with a 5mx (Unfortunatly, it is not my own ;-(. I got a
> >speed of 11 KByte/sec while beaming my perl.sis to the 5mx. (I only
> >got 8 KBytes to a Psion 5).
> I got better values (10KB/s) as I remember, I will measure again. Have you enabled
>FAST_RR on Linux?
I have to investigate this a little bit further...
>
> >It may work with other EPOC devices. Maybe irepoc may be a better name.
> Good candidate. Would you use in on newer devices? I understand the P5MX uses IrOBEX
>which is preferable I think.
It seems to me that the Psion 5mx only uses IrOBEX when exchanging
`Contacts'. This application is new in ER5. You can beam your visiting
card to the Palm and it is recognized correctly and vice versa.
> >But wait! On both Psion5 and Psion 5mx, you may receive files that
> >are too short.
> Try the attached patch please. This bug in the program turned up in later versions
>of the
stack.
Sorry, it does not fix the bug.
> >http://www.fortunecity.de/wolkenkratzer/trumpet/84/perl/perl_10.zip
> Does this work well?
Well, almost. Do not expect to get the network support working, You do
not have pipes,
No cursor control (besides BS, CR, LF and FF), no access to the GUI.
But: The perl debugger is working. I have used it for pod documentation.
For data processing it is O.K.
And use must have plenty of free RAM.
Cheers
Olaf
--
Dr. Olaf Flebbe Phone +49 (0)7071-9457-32
science + computing gmbh FAX +49 (0)7071-9457-27
Hagellocher Weg 71
D-72070 Tuebingen Email: [EMAIL PROTECTED]
The amount of work to be done increases in proportion to the
amount of work already completed.
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
