This is great news! What argument do you use for irattach? When I use the
220L RS232 dongle, is invoke irattach as follows:
irattach /dev/ttyS0 -d actisys
I assume you just load the irtty module (without loading and serial dongle
modules). Is this correct?
Thanks for your reply!
Jon Burford
----- Original Message -----
From: Olaf Flebbe <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, September 19, 1999 6:05 AM
Subject: Re: [Linux-IrDA] ACTISYS 210L motherboard dongle
> Jon Burford wrote:
> >
> > I have looked at the current status and support hardware for the Linux
IrDA
> > project and I don't see the ACTISYS 210L motherboard dongle. I was
> > wondering if Dag or anyone else knows whether the 220 drivers might work
or
> > how similiar this hardware is to the 220 dongles. On my PC, I was told
to
> > activate HPSIR on UART2 and it will make COM2 the IrDA port. Any info
on
> > this hardware is much appreciated.
>
> I am using this one, too. And it works. It is just a plain serial IrTTY
> device.
>
> Only SIR, thus it is limited to 115200 Baud.
>
> Olaf
>
> --
> Dr. Olaf Flebbe Email: [EMAIL PROTECTED]
>
> _______________________________________________
> Linux-IrDA mailing list - [EMAIL PROTECTED]
> http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
>
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
