Signed-off-by: Neil Armstrong <narmstr...@baylibre.com> --- arch/arm/boot/dts/ox810se.dtsi | 279 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 279 insertions(+) create mode 100644 arch/arm/boot/dts/ox810se.dtsi
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
new file mode 100644
index 0000000..a86d7f0
--- /dev/null
+++ b/arch/arm/boot/dts/ox810se.dtsi
@@ -0,0 +1,279 @@
+/*
+ * ox810se.dtsi - Device tree file for PLX Technology OX810SE SoC
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstr...@baylibre.com>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "plxtech,ox810se";
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ device_type = "cpu";
+ compatible = "arm,arm926ej-s";
+ clocks = <&armclk>;
+ };
+ };
+
+ memory {
+ /* Max 256MB @ 0x48000000 */
+ reg = <0x48000000 0x10000000>;
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ };
+
+ clocks {
+ osc: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ gmacclk: gmacclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ rpsclk: rspclk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&osc>;
+ };
+
+ pll400: pll400 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <733333333>;
+ };
+
+ sysclk: sysclk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clocks = <&pll400>;
+ };
+
+ armclk: armclk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clocks = <&pll400>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+ interrupt-parent = <&intc>;
+
+ apb-bridge@44000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0x44000000 0x1000000>;
+
+ pinctrl: pinctrl {
+ compatible = "plxtech,nas782x-pinctrl",
"simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Regmap for sys registers */
+ plxtech,sys-ctrl = <&sys>;
+
+ /* Default, all-open mux-map */
+ plxtech,mux-mask = <
+ 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF
0xFFFFFFFF 0xFFFFFFFF
+ 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF
0xFFFFFFFF 0xFFFFFFFF
+ >;
+
+ gpio0: gpio@000000 {
+ compatible = "plxtech,nas782x-gpio";
+ reg = <0x000000 0x100000>;
+ interrupts = <21>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #gpio-lines = <32>;
+ };
+
+ gpio1: gpio@100000 {
+ compatible = "plxtech,nas782x-gpio";
+ reg = <0x100000 0x100000>;
+ interrupts = <22>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #gpio-lines = <3>;
+ };
+
+ uart0 {
+ pinctrl_uart0: uart0 {
+ plxtech,pins = <0 31 3 0
+ 0 32 3 0>;
+ };
+ pinctrl_uart0_modem: uart0_modem {
+ plxtech,pins = <0 27 3 0
+ 0 28 3 0
+ 0 29 3 0
+ 0 30 3 0
+ 0 33 3 0
+ 0 34 3 0>;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1: uart1 {
+ plxtech,pins = <0 20 3 0
+ 0 22 3 0>;
+ };
+ pinctrl_uart1_modem: uart1_modem {
+ plxtech,pins = <0 8 3 0
+ 0 9 3 0
+ 0 23 3 0
+ 0 24 3 0
+ 0 25 3 0
+ 0 26 3 0>;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2: uart2 {
+ plxtech,pins = <0 6 3 0
+ 0 7 3 0>;
+ };
+ pinctrl_uart2_modem: uart2_modem {
+ plxtech,pins = <0 0 3 0
+ 0 1 3 0
+ 0 2 3 0
+ 0 3 3 0
+ 0 4 3 0
+ 0 5 3 0>;
+ };
+ };
+ };
+
+ uart0: uart@200000 {
+ compatible = "ns16550a";
+ reg = <0x200000 0x100000>;
+ clocks = <&sysclk>;
+ interrupts = <23>;
+ reg-shift = <0>;
+ fifo-size = <16>;
+ reg-io-width = <1>;
+ current-speed = <115200>;
+ no-loopback-test;
+ status = "disabled";
+ resets = <&reset 17>;
+ };
+
+ uart1: uart@300000 {
+ compatible = "ns16550a";
+ reg = <0x300000 0x100000>;
+ clocks = <&sysclk>;
+ interrupts = <24>;
+ reg-shift = <0>;
+ fifo-size = <16>;
+ reg-io-width = <1>;
+ current-speed = <115200>;
+ no-loopback-test;
+ status = "disabled";
+ resets = <&reset 18>;
+ };
+
+ uart2: uart@900000 {
+ compatible = "ns16550a";
+ reg = <0x900000 0x100000>;
+ clocks = <&sysclk>;
+ interrupts = <29>;
+ reg-shift = <0>;
+ fifo-size = <16>;
+ reg-io-width = <1>;
+ current-speed = <115200>;
+ no-loopback-test;
+ status = "disabled";
+ resets = <&reset 22>;
+ };
+
+ uart3: uart@a00000 {
+ compatible = "ns16550a";
+ reg = <0xa00000 0x100000>;
+ clocks = <&sysclk>;
+ interrupts = <30>;
+ reg-shift = <0>;
+ fifo-size = <16>;
+ reg-io-width = <1>;
+ current-speed = <115200>;
+ no-loopback-test;
+ status = "disabled";
+ resets = <&reset 23>;
+ };
+ };
+
+ apb-bridge@45000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0x45000000 0x1000000>;
+
+ sys: sys-ctrl@000000 {
+ compatible = "plxtech,ox810se-sys-ctrl",
"syscon", "simple-mfd";
+ reg = <0x000000 0x100000>;
+
+ reset: reset-controller {
+ compatible = "plxtech,nas782x-reset";
+ #reset-cells = <1>;
+ };
+
+ stdclk: stdclk {
+ compatible = "plxtech,ox810se-stdclk",
"plxtech,nas782x-stdclk";
+ #clock-cells = <1>;
+ };
+ };
+
+ rps@300000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0x300000 0x100000>;
+
+ intc: interrupt-controller@0 {
+ compatible = "plxtech,nas782x-rps";
+ interrupt-controller;
+ reg = <0 0x200>;
+ #interrupt-cells = <1>;
+ };
+
+ timer0: timer@200 {
+ compatible =
"plxtech,nas782x-rps-timer";
+ reg = <0x200 0x40>;
+ clocks = <&rpsclk>;
+ interrupts = <4 5>;
+ };
+ };
+ };
+ };
+};
--
1.9.1
