On Mon, Mar 28, 2016 at 11:55:28AM -0500, Matthew McClintock wrote:
>
> > On Mar 25, 2016, at 11:23 AM, Guenter Roeck <li...@roeck-us.net> wrote:
> >
> >> -#define WDT_RST 0x38
> >> -#define WDT_EN 0x40
> >> -#define WDT_BITE_TIME 0x5C
> >> +enum wdt_reg {
> >> + WDT_RST,
> >> + WDT_EN,
> >> + WDT_BITE_TIME,
> >> +};
> >> +
> >> +static const u32 reg_offset_data_apcs_tmr[] = {
> >> + [WDT_RST] = 0x38,
> >> + [WDT_EN] = 0x40,
> >> + [WDT_BITE_TIME] = 0x5C,
> >> +};
> >> +
> >> +static const u32 reg_offset_data_kpss[] = {
> >> + [WDT_RST] = 0x4,
> >> + [WDT_EN] = 0x8,
> >
> > Does this work ? In the datasheet I have in front of me (APQ8064), the
> > watchdog
> > at this address uses different bits. At address 0x40 (eg
> > GSS_A5_APCS_WDT0_EN),
>
> 0x40 is acps_tmr, and looks fine.
>
> > bit 0 is the enable bit, and bit 1 enables interrupts. At address 0x08 (eg
> > LPASS_QDSP6SS_WDOG_UNMASKED_INT_EN), bit 0 enables interrupts and bit 1 is
> > undefined.
>
> I honestly don’t see anything at 0x8 for either blocks that looks like this.
> For the new block bit 0 is enabling and bit 1 enabled interrupts.
>
That is from the APQ8064 datasheet.
> > Or does "qcom,kpss-standalone" refer to some other watchdog ?
>
> APQ8064 would be the apcs_tmr block variant which is unchanged. MSM8916 as
> well as IPQ4019 would use the new kpss variant.
>
Unfortunately I don't have access to those datasheets.
> I went with block names I found internally here, but I will be the first to
> admit I am terrible at names. The old block name for APQ was CPU0_ACPS_TMR
> (where really the watchdog is a subset of a timer block), and on the IPQ4019
> it’s called APCS_KPSS_WDT and it’s really just a watchdog block.
>
> I kept the same driver because the register’s currently in use were
> compatible. By the way, I tested this on an IPQ806x and IPQ4019 both new and
> old blocks.
>
The property name should probably be something like 'qcom,kpss-wdt'
(or 'qcom,kpss-watchdog' ?), possibly in addition to 'qcom,kpss-ipq4019-wdt'
and 'qcom,kpss-msm8916-wdt'.
Guenter
