Re: Linux 2.4 Status / TODO page (Updated as of 2.4.0-test10)

[Jeff Garzik]

Alan Cox wrote:
> 
> > > Not unless it was fixed in test10 release.  I have a PC LinkSys dual 10/100 and
> > > 56K card that will kill the machine if you physically pull it out no matter what
> > > cardctl/module steps are taken.
> > >
> > > It uses the ne2k and serial drivers.
> >
> > Part of that might be that serial doesn't support hotplug without
> > patching.
> 
> Linksys rings a bell with an outstandng 2.2 lockup on pcmcia. I think this might
> be a driver bug ?

On 2.2.x, possibly.

On 2.4.x:  1) insert CardBus serial or modem card, that reports itself
as PCI_CLASS_COMMUNICATION_SERIAL.  2) modprobe serial, it sees and
registers the PCI serial port.  3) eject card, which serial.c doesn't
presently notice.  ...

        Jeff


-- 
Jeff Garzik             | Dinner is ready when
Building 1024           | the smoke alarm goes off.
MandrakeSoft            |       -/usr/games/fortune
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/