Em Tue, May 24, 2016 at 12:52:36PM -0700, Andi Kleen escreveu:
> From: Andi Kleen <a...@linux.intel.com>
>
> Add basic plumbing for TopDown in perf stat
>
> TopDown is intended to replace the frontend cycles idle/
> backend cycles idle metrics in standard perf stat output.
> These metrics are not reliable in many workloads,
> due to out of order effects.
>
> This implements a new --topdown mode in perf stat
> (similar to --transaction) that measures the pipe line
> bottlenecks using standardized formulas. The measurement
> can be all done with 5 counters (one fixed counter)
>
> The result are four metrics:
> FrontendBound, BackendBound, BadSpeculation, Retiring
>
> that describe the CPU pipeline behavior on a high level.
>
> FrontendBound and BackendBound
> BadSpeculation is a higher
>
> The full top down methology has many hierarchical metrics.
> This implementation only supports level 1 which can be
> collected without multiplexing. A full implementation
> of top down on top of perf is available in pmu-tools toplev.
> (http://github.com/andikleen/pmu-tools)
>
> The current version works on Intel Core CPUs starting
> with Sandy Bridge, and Atom CPUs starting with Silvermont.
> In principle the generic metrics should be also implementable
> on other out of order CPUs.
After applying [1/4] (this patch):
[root@jouet linux]# lscpu | grep Model
Model: 61
Model name: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz
[root@jouet linux]#
[root@jouet linux]# perf stat --topdown -a usleep 1
System does not support topdown
[root@jouet linux]#
[root@jouet linux]# uname -r
4.6.0+
Which is a Broadwell-U, dual-core, 14 nm.
[root@jouet linux]# echo 0 > /proc/sys/kernel/nmi_watchdog
[root@jouet linux]# perf stat --topdown -a usleep 1
System does not support topdown
[root@jouet linux]# cat /proc/sys/kernel/nmi_watchdog
0
[root@jouet linux]#
Please advise.
- Arnaldo
> TopDown level 1 uses a set of abstracted metrics which
> are generic to out of order CPU cores (although some
> CPUs may not implement all of them):
>
> topdown-total-slots Available slots in the pipeline
> topdown-slots-issued Slots issued into the pipeline
> topdown-slots-retired Slots successfully retired
> topdown-fetch-bubbles Pipeline gaps in the frontend
> topdown-recovery-bubbles Pipeline gaps during recovery
> from misspeculation
>
> These metrics then allow to compute four useful metrics:
> FrontendBound, BackendBound, Retiring, BadSpeculation.
>
> Add a new --topdown options to enable events.
> When --topdown is specified set up events for all topdown
> events supported by the kernel.
> Add topdown-* as a special case to the event parser, as is
> needed for all events containing -.
>
> The actual code to compute the metrics is in follow-on patches.
>
> v2: Use standard sysctl read function.
> v3: Move x86 specific code to arch/
> v4: Enable --metric-only implicitly for topdown.
> v5: Add --single-thread option to not force per core mode
> v6: Fix output order of topdown metrics
> v7: Allow combining with -d
> v8: Remove --single-thread again
> v9: Rename functions, adding arch_ and topdown_.
> v10: Expand man page and describe TopDown better
> Paste intro into commit description.
> Print error when malloc fails.
> Acked-by: Jiri Olsa <jo...@kernel.org>
> Signed-off-by: Andi Kleen <a...@linux.intel.com>
> ---
> tools/perf/Documentation/perf-stat.txt | 32 +++++++++
> tools/perf/arch/x86/util/Build | 1 +
> tools/perf/arch/x86/util/group.c | 27 ++++++++
> tools/perf/builtin-stat.c | 119
> ++++++++++++++++++++++++++++++++-
> tools/perf/util/group.h | 7 ++
> tools/perf/util/parse-events.l | 1 +
> 6 files changed, 184 insertions(+), 3 deletions(-)
> create mode 100644 tools/perf/arch/x86/util/group.c
> create mode 100644 tools/perf/util/group.h
>
> diff --git a/tools/perf/Documentation/perf-stat.txt
> b/tools/perf/Documentation/perf-stat.txt
> index 04f23b404bbc..d96ccd4844df 100644
> --- a/tools/perf/Documentation/perf-stat.txt
> +++ b/tools/perf/Documentation/perf-stat.txt
> @@ -204,6 +204,38 @@ Aggregate counts per physical processor for system-wide
> mode measurements.
> --no-aggr::
> Do not aggregate counts across all monitored CPUs.
>
> +--topdown::
> +Print top down level 1 metrics if supported by the CPU. This allows to
> +determine bottle necks in the CPU pipeline for CPU bound workloads,
> +by breaking the cycles consumed down into frontend bound, backend bound,
> +bad speculation and retiring.
> +
> +Frontend bound means that the CPU cannot fetch and decode instructions fast
> +enough. Backend bound means that computation or memory access is the bottle
> +neck. Bad Speculation means that the CPU wasted cycles due to branch
> +mispredictions and similar issues. Retiring means that the CPU computed
> without
> +an apparently bottleneck. The bottleneck is only the real bottleneck
> +if the workload is actually bound by the CPU and not by something else.
> +
> +For best results it is usually a good idea to use it with interval
> +mode like -I 1000, as the bottleneck of workloads can change often.
> +
> +The top down metrics are collected per core instead of per
> +CPU thread. Per core mode is automatically enabled
> +and -a (global monitoring) is needed, requiring root rights or
> +perf.perf_event_paranoid=-1.
> +
> +Topdown uses the full Performance Monitoring Unit, and needs
> +disabling of the NMI watchdog (as root):
> +echo 0 > /proc/sys/kernel/nmi_watchdog
> +for best results. Otherwise the bottlenecks may be inconsistent
> +on workload with changing phases.
> +
> +This enables --metric-only, unless overriden with --no-metric-only.
> +
> +To interpret the results it is usually needed to know on which
> +CPUs the workload runs on. If needed the CPUs can be forced using
> +taskset.
>
> EXAMPLES
> --------
> diff --git a/tools/perf/arch/x86/util/Build b/tools/perf/arch/x86/util/Build
> index 465970370f3e..4cd8a16b1b7b 100644
> --- a/tools/perf/arch/x86/util/Build
> +++ b/tools/perf/arch/x86/util/Build
> @@ -3,6 +3,7 @@ libperf-y += tsc.o
> libperf-y += pmu.o
> libperf-y += kvm-stat.o
> libperf-y += perf_regs.o
> +libperf-y += group.o
>
> libperf-$(CONFIG_DWARF) += dwarf-regs.o
> libperf-$(CONFIG_BPF_PROLOGUE) += dwarf-regs.o
> diff --git a/tools/perf/arch/x86/util/group.c
> b/tools/perf/arch/x86/util/group.c
> new file mode 100644
> index 000000000000..37f92aa39a5d
> --- /dev/null
> +++ b/tools/perf/arch/x86/util/group.c
> @@ -0,0 +1,27 @@
> +#include <stdio.h>
> +#include "api/fs/fs.h"
> +#include "util/group.h"
> +
> +/*
> + * Check whether we can use a group for top down.
> + * Without a group may get bad results due to multiplexing.
> + */
> +bool arch_topdown_check_group(bool *warn)
> +{
> + int n;
> +
> + if (sysctl__read_int("kernel/nmi_watchdog", &n) < 0)
> + return false;
> + if (n > 0) {
> + *warn = true;
> + return false;
> + }
> + return true;
> +}
> +
> +void arch_topdown_group_warn(void)
> +{
> + fprintf(stderr,
> + "nmi_watchdog enabled with topdown. May give wrong results.\n"
> + "Disable with echo 0 > /proc/sys/kernel/nmi_watchdog\n");
> +}
> diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
> index 715a1128daeb..dab184d86816 100644
> --- a/tools/perf/builtin-stat.c
> +++ b/tools/perf/builtin-stat.c
> @@ -59,10 +59,13 @@
> #include "util/thread.h"
> #include "util/thread_map.h"
> #include "util/counts.h"
> +#include "util/group.h"
> #include "util/session.h"
> #include "util/tool.h"
> +#include "util/group.h"
> #include "asm/bug.h"
>
> +#include <api/fs/fs.h>
> #include <stdlib.h>
> #include <sys/prctl.h>
> #include <locale.h>
> @@ -98,6 +101,15 @@ static const char * transaction_limited_attrs = {
> "}"
> };
>
> +static const char * topdown_attrs[] = {
> + "topdown-total-slots",
> + "topdown-slots-retired",
> + "topdown-recovery-bubbles",
> + "topdown-fetch-bubbles",
> + "topdown-slots-issued",
> + NULL,
> +};
> +
> static struct perf_evlist *evsel_list;
>
> static struct target target = {
> @@ -112,6 +124,7 @@ static volatile pid_t child_pid
> = -1;
> static bool null_run = false;
> static int detailed_run = 0;
> static bool transaction_run;
> +static bool topdown_run = false;
> static bool big_num = true;
> static int big_num_opt = -1;
> static const char *csv_sep = NULL;
> @@ -124,6 +137,7 @@ static unsigned int initial_delay
> = 0;
> static unsigned int unit_width = 4; /*
> strlen("unit") */
> static bool forever = false;
> static bool metric_only = false;
> +static bool force_metric_only = false;
> static struct timespec ref_time;
> static struct cpu_map *aggr_map;
> static aggr_get_id_t aggr_get_id;
> @@ -1520,6 +1534,14 @@ static int stat__set_big_num(const struct option *opt
> __maybe_unused,
> return 0;
> }
>
> +static int enable_metric_only(const struct option *opt __maybe_unused,
> + const char *s __maybe_unused, int unset)
> +{
> + force_metric_only = true;
> + metric_only = !unset;
> + return 0;
> +}
> +
> static const struct option stat_options[] = {
> OPT_BOOLEAN('T', "transaction", &transaction_run,
> "hardware transaction statistics"),
> @@ -1578,8 +1600,10 @@ static const struct option stat_options[] = {
> "aggregate counts per thread", AGGR_THREAD),
> OPT_UINTEGER('D', "delay", &initial_delay,
> "ms to wait before starting measurement after program
> start"),
> - OPT_BOOLEAN(0, "metric-only", &metric_only,
> - "Only print computed metrics. No raw values"),
> + OPT_CALLBACK_NOOPT(0, "metric-only", &metric_only, NULL,
> + "Only print computed metrics. No raw values",
> enable_metric_only),
> + OPT_BOOLEAN(0, "topdown", &topdown_run,
> + "measure topdown level 1 statistics"),
> OPT_END()
> };
>
> @@ -1772,12 +1796,62 @@ static int perf_stat_init_aggr_mode_file(struct
> perf_stat *st)
> return 0;
> }
>
> +static int topdown_filter_events(const char **attr, char **str, bool
> use_group)
> +{
> + int off = 0;
> + int i;
> + int len = 0;
> + char *s;
> +
> + for (i = 0; attr[i]; i++) {
> + if (pmu_have_event("cpu", attr[i])) {
> + len += strlen(attr[i]) + 1;
> + attr[i - off] = attr[i];
> + } else
> + off++;
> + }
> + attr[i - off] = NULL;
> +
> + *str = malloc(len + 1 + 2);
> + if (!*str)
> + return -1;
> + s = *str;
> + if (i - off == 0) {
> + *s = 0;
> + return 0;
> + }
> + if (use_group)
> + *s++ = '{';
> + for (i = 0; attr[i]; i++) {
> + strcpy(s, attr[i]);
> + s += strlen(s);
> + *s++ = ',';
> + }
> + if (use_group) {
> + s[-1] = '}';
> + *s = 0;
> + } else
> + s[-1] = 0;
> + return 0;
> +}
> +
> +__weak bool arch_topdown_check_group(bool *warn)
> +{
> + *warn = false;
> + return false;
> +}
> +
> +__weak void arch_topdown_group_warn(void)
> +{
> +}
> +
> /*
> * Add default attributes, if there were no attributes specified or
> * if -d/--detailed, -d -d or -d -d -d is used:
> */
> static int add_default_attributes(void)
> {
> + int err;
> struct perf_event_attr default_attrs0[] = {
>
> { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK
> },
> @@ -1896,7 +1970,6 @@ static int add_default_attributes(void)
> return 0;
>
> if (transaction_run) {
> - int err;
> if (pmu_have_event("cpu", "cycles-ct") &&
> pmu_have_event("cpu", "el-start"))
> err = parse_events(evsel_list, transaction_attrs, NULL);
> @@ -1909,6 +1982,46 @@ static int add_default_attributes(void)
> return 0;
> }
>
> + if (topdown_run) {
> + char *str = NULL;
> + bool warn = false;
> +
> + if (stat_config.aggr_mode != AGGR_GLOBAL &&
> + stat_config.aggr_mode != AGGR_CORE) {
> + pr_err("top down event configuration requires
> --per-core mode\n");
> + return -1;
> + }
> + stat_config.aggr_mode = AGGR_CORE;
> + if (nr_cgroups || !target__has_cpu(&target)) {
> + pr_err("top down event configuration requires
> system-wide mode (-a)\n");
> + return -1;
> + }
> +
> + if (!force_metric_only)
> + metric_only = true;
> + if (topdown_filter_events(topdown_attrs, &str,
> + arch_topdown_check_group(&warn)) < 0) {
> + pr_err("Out of memory\n");
> + return -1;
> + }
> + if (topdown_attrs[0] && str) {
> + if (warn)
> + arch_topdown_group_warn();
> + err = parse_events(evsel_list, str, NULL);
> + if (err) {
> + fprintf(stderr,
> + "Cannot set up top down events %s:
> %d\n",
> + str, err);
> + free(str);
> + return -1;
> + }
> + } else {
> + fprintf(stderr, "System does not support topdown\n");
> + return -1;
> + }
> + free(str);
> + }
> +
> if (!evsel_list->nr_entries) {
> if (perf_evlist__add_default_attrs(evsel_list, default_attrs0)
> < 0)
> return -1;
> diff --git a/tools/perf/util/group.h b/tools/perf/util/group.h
> new file mode 100644
> index 000000000000..116debe7a995
> --- /dev/null
> +++ b/tools/perf/util/group.h
> @@ -0,0 +1,7 @@
> +#ifndef GROUP_H
> +#define GROUP_H 1
> +
> +bool arch_topdown_check_group(bool *warn);
> +void arch_topdown_group_warn(void);
> +
> +#endif
> diff --git a/tools/perf/util/parse-events.l b/tools/perf/util/parse-events.l
> index 1477fbc78993..744ebe3fa30f 100644
> --- a/tools/perf/util/parse-events.l
> +++ b/tools/perf/util/parse-events.l
> @@ -259,6 +259,7 @@ cycles-ct { return
> str(yyscanner, PE_KERNEL_PMU_EVENT); }
> cycles-t { return str(yyscanner,
> PE_KERNEL_PMU_EVENT); }
> mem-loads { return str(yyscanner,
> PE_KERNEL_PMU_EVENT); }
> mem-stores { return str(yyscanner,
> PE_KERNEL_PMU_EVENT); }
> +topdown-[a-z-]+ { return str(yyscanner,
> PE_KERNEL_PMU_EVENT); }
>
> L1-dcache|l1-d|l1d|L1-data |
> L1-icache|l1-i|l1i|L1-instruction |
> --
> 2.5.5
