- Convert from printk() to pr_*(),
- Add missing continuations, to fix user-visible breakage,
- Drop useless WARNING prefix,
- Move trailing spaces to start of continuations.
Fixes: 4bcc595ccd80decb ("printk: reinstate KERN_CONT for printing continuation
lines")
Signed-off-by: Geert Uytterhoeven <ge...@linux-m68k.org>
---
arch/m68k/atari/atakeyb.c | 14 ++++++------
arch/m68k/atari/config.c | 56 +++++++++++++++++++++++------------------------
2 files changed, 35 insertions(+), 35 deletions(-)
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index 264db11268039329..37091898adb3d3b5 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -149,7 +149,7 @@ static irqreturn_t atari_keyboard_interrupt(int irq, void
*dummy)
if (acia_stat & ACIA_OVRN) {
/* a very fast typist or a slow system, give a warning */
/* ...happens often if interrupts were disabled for too long */
- printk(KERN_DEBUG "Keyboard overrun\n");
+ pr_debug("Keyboard overrun\n");
scancode = acia.key_data;
if (ikbd_self_test)
/* During self test, don't do resyncing, just process
the code */
@@ -228,14 +228,14 @@ static irqreturn_t atari_keyboard_interrupt(int irq, void
*dummy)
keytyp = KTYP(keyval) - 0xf0;
keyval = KVAL(keyval);
- printk(KERN_WARNING "Key with scancode
%d ", scancode);
+ pr_warn("Key with scancode %d ",
scancode);
if (keytyp == KT_LATIN || keytyp ==
KT_LETTER) {
if (keyval < ' ')
- printk("('^%c') ",
keyval + '@');
+ pr_cont("('^%c') ",
keyval + '@');
else
- printk("('%c') ",
keyval);
+ pr_cont("('%c') ",
keyval);
}
- printk("is broken -- will be
ignored.\n");
+ pr_cont("is broken -- will be
ignored.\n");
break;
} else if (test_bit(scancode, broken_keys))
break;
@@ -299,7 +299,7 @@ static irqreturn_t atari_keyboard_interrupt(int irq, void
*dummy)
#endif
if (acia_stat & (ACIA_FE | ACIA_PE)) {
- printk("Error in keyboard communication\n");
+ pr_err("Error in keyboard communication\n");
}
/* handle_scancode() can take a lot of time, so check again if
@@ -553,7 +553,7 @@ int atari_keyb_init(void)
barrier();
/* if not incremented: no 0xf1 received */
if (ikbd_self_test == 1)
- printk(KERN_ERR "WARNING: keyboard self test failed!\n");
+ pr_err("Keyboard self test failed!\n");
ikbd_self_test = 0;
ikbd_mouse_disable();
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 97a3c38cd1f550cc..fdfc2c3cf1457f82 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -234,44 +234,44 @@ void __init config_atari(void)
* Determine hardware present
*/
- printk("Atari hardware found: ");
+ pr_info("Atari hardware found:");
if (MACH_IS_MEDUSA) {
/* There's no Atari video hardware on the Medusa, but all the
* addresses below generate a DTACK so no bus error occurs! */
} else if (hwreg_present(f030_xreg)) {
ATARIHW_SET(VIDEL_SHIFTER);
- printk("VIDEL ");
+ pr_cont(" VIDEL");
/* This is a temporary hack: If there is Falcon video
* hardware, we assume that the ST-DMA serves SCSI instead of
* ACSI. In the future, there should be a better method for
* this...
*/
ATARIHW_SET(ST_SCSI);
- printk("STDMA-SCSI ");
+ pr_cont(" STDMA-SCSI");
} else if (hwreg_present(tt_palette)) {
ATARIHW_SET(TT_SHIFTER);
- printk("TT_SHIFTER ");
+ pr_cont(" TT_SHIFTER");
} else if (hwreg_present(&shifter.bas_hi)) {
if (hwreg_present(&shifter.bas_lo) &&
(shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
ATARIHW_SET(EXTD_SHIFTER);
- printk("EXTD_SHIFTER ");
+ pr_cont(" EXTD_SHIFTER");
} else {
ATARIHW_SET(STND_SHIFTER);
- printk("STND_SHIFTER ");
+ pr_cont(" STND_SHIFTER");
}
}
if (hwreg_present(&st_mfp.par_dt_reg)) {
ATARIHW_SET(ST_MFP);
- printk("ST_MFP ");
+ pr_cont(" ST_MFP");
}
if (hwreg_present(&tt_mfp.par_dt_reg)) {
ATARIHW_SET(TT_MFP);
- printk("TT_MFP ");
+ pr_cont(" TT_MFP");
}
if (hwreg_present(&tt_scsi_dma.dma_addr_hi)) {
ATARIHW_SET(SCSI_DMA);
- printk("TT_SCSI_DMA ");
+ pr_cont(" TT_SCSI_DMA");
}
/*
* The ST-DMA address registers aren't readable
@@ -284,27 +284,27 @@ void __init config_atari(void)
(st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) &&
st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) {
ATARIHW_SET(EXTD_DMA);
- printk("EXTD_DMA ");
+ pr_cont(" EXTD_DMA");
}
if (hwreg_present(&tt_scsi.scsi_data)) {
ATARIHW_SET(TT_SCSI);
- printk("TT_SCSI ");
+ pr_cont(" TT_SCSI");
}
if (hwreg_present(&sound_ym.rd_data_reg_sel)) {
ATARIHW_SET(YM_2149);
- printk("YM2149 ");
+ pr_cont(" YM2149");
}
if (!MACH_IS_MEDUSA && hwreg_present(&tt_dmasnd.ctrl)) {
ATARIHW_SET(PCM_8BIT);
- printk("PCM ");
+ pr_cont(" PCM");
}
if (hwreg_present(&falcon_codec.unused5)) {
ATARIHW_SET(CODEC);
- printk("CODEC ");
+ pr_cont(" CODEC");
}
if (hwreg_present(&dsp56k_host_interface.icr)) {
ATARIHW_SET(DSP56K);
- printk("DSP56K ");
+ pr_cont(" DSP56K");
}
if (hwreg_present(&tt_scc_dma.dma_ctrl) &&
#if 0
@@ -316,33 +316,33 @@ void __init config_atari(void)
#endif
) {
ATARIHW_SET(SCC_DMA);
- printk("SCC_DMA ");
+ pr_cont(" SCC_DMA");
}
if (scc_test(&atari_scc.cha_a_ctrl)) {
ATARIHW_SET(SCC);
- printk("SCC ");
+ pr_cont(" SCC");
}
if (scc_test(&st_escc.cha_b_ctrl)) {
ATARIHW_SET(ST_ESCC);
- printk("ST_ESCC ");
+ pr_cont(" ST_ESCC");
}
if (hwreg_present(&tt_scu.sys_mask)) {
ATARIHW_SET(SCU);
/* Assume a VME bus if there's a SCU */
ATARIHW_SET(VME);
- printk("VME SCU ");
+ pr_cont(" VME SCU");
}
if (hwreg_present((void *)(0xffff9210))) {
ATARIHW_SET(ANALOG_JOY);
- printk("ANALOG_JOY ");
+ pr_cont(" ANALOG_JOY");
}
if (hwreg_present(blitter.halftone)) {
ATARIHW_SET(BLITTER);
- printk("BLITTER ");
+ pr_cont(" BLITTER");
}
if (hwreg_present((void *)0xfff00039)) {
ATARIHW_SET(IDE);
- printk("IDE ");
+ pr_cont(" IDE");
}
#if 1 /* This maybe wrong */
if (!MACH_IS_MEDUSA && hwreg_present(&tt_microwire.data) &&
@@ -355,31 +355,31 @@ void __init config_atari(void)
ATARIHW_SET(MICROWIRE);
while (tt_microwire.mask != 0x7ff)
;
- printk("MICROWIRE ");
+ pr_cont(" MICROWIRE");
}
#endif
if (hwreg_present(&tt_rtc.regsel)) {
ATARIHW_SET(TT_CLK);
- printk("TT_CLK ");
+ pr_cont(" TT_CLK");
mach_hwclk = atari_tt_hwclk;
mach_set_clock_mmss = atari_tt_set_clock_mmss;
}
if (hwreg_present(&mste_rtc.sec_ones)) {
ATARIHW_SET(MSTE_CLK);
- printk("MSTE_CLK ");
+ pr_cont(" MSTE_CLK");
mach_hwclk = atari_mste_hwclk;
mach_set_clock_mmss = atari_mste_set_clock_mmss;
}
if (!MACH_IS_MEDUSA && hwreg_present(&dma_wd.fdc_speed) &&
hwreg_write(&dma_wd.fdc_speed, 0)) {
ATARIHW_SET(FDCSPEED);
- printk("FDC_SPEED ");
+ pr_cont(" FDC_SPEED");
}
if (!ATARIHW_PRESENT(ST_SCSI)) {
ATARIHW_SET(ACSI);
- printk("ACSI ");
+ pr_cont(" ACSI");
}
- printk("\n");
+ pr_cont("\n");
if (CPU_IS_040_OR_060)
/* Now it seems to be safe to turn of the tt0 transparent
--
1.9.1
