The GISB bus can support addresses beyond 32-bits. So this commit
corrects support for reading a captured 64-bit address into a 64-bit
variable by obtaining the high bits from the ARB_ERR_CAP_HI_ADDR
register (when present) and then outputting the full 64-bit value.
It also removes unused definitions.
Fixes: 44127b771d9c ("bus: add Broadcom GISB bus arbiter timeout/error handler")
Signed-off-by: Doug Berger <open...@gmail.com>
---
drivers/bus/brcmstb_gisb.c | 36 ++++++++++++++++++++----------------
1 file changed, 20 insertions(+), 16 deletions(-)
diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index 9eba0143f1a4..c8d2a61d21ed 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -37,8 +37,6 @@
#define ARB_ERR_CAP_CLEAR (1 << 0)
#define ARB_ERR_CAP_STATUS_TIMEOUT (1 << 12)
#define ARB_ERR_CAP_STATUS_TEA (1 << 11)
-#define ARB_ERR_CAP_STATUS_BS_SHIFT (1 << 2)
-#define ARB_ERR_CAP_STATUS_BS_MASK 0x3c
#define ARB_ERR_CAP_STATUS_WRITE (1 << 1)
#define ARB_ERR_CAP_STATUS_VALID (1 << 0)
@@ -47,7 +45,6 @@ enum {
ARB_ERR_CAP_CLR,
ARB_ERR_CAP_HI_ADDR,
ARB_ERR_CAP_ADDR,
- ARB_ERR_CAP_DATA,
ARB_ERR_CAP_STATUS,
ARB_ERR_CAP_MASTER,
};
@@ -57,7 +54,6 @@ static const int gisb_offsets_bcm7038[] = {
[ARB_ERR_CAP_CLR] = 0x0c4,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x0c8,
- [ARB_ERR_CAP_DATA] = 0x0cc,
[ARB_ERR_CAP_STATUS] = 0x0d0,
[ARB_ERR_CAP_MASTER] = -1,
};
@@ -67,7 +63,6 @@ static const int gisb_offsets_bcm7400[] = {
[ARB_ERR_CAP_CLR] = 0x0c8,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x0cc,
- [ARB_ERR_CAP_DATA] = 0x0d0,
[ARB_ERR_CAP_STATUS] = 0x0d4,
[ARB_ERR_CAP_MASTER] = 0x0d8,
};
@@ -77,7 +72,6 @@ static const int gisb_offsets_bcm7435[] = {
[ARB_ERR_CAP_CLR] = 0x168,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x16c,
- [ARB_ERR_CAP_DATA] = 0x170,
[ARB_ERR_CAP_STATUS] = 0x174,
[ARB_ERR_CAP_MASTER] = 0x178,
};
@@ -87,7 +81,6 @@ static const int gisb_offsets_bcm7445[] = {
[ARB_ERR_CAP_CLR] = 0x7e4,
[ARB_ERR_CAP_HI_ADDR] = 0x7e8,
[ARB_ERR_CAP_ADDR] = 0x7ec,
- [ARB_ERR_CAP_DATA] = 0x7f0,
[ARB_ERR_CAP_STATUS] = 0x7f4,
[ARB_ERR_CAP_MASTER] = 0x7f8,
};
@@ -109,9 +102,13 @@ static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev,
int reg)
{
int offset = gdev->gisb_offsets[reg];
- /* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
- if (offset == -1)
- return 1;
+ if (offset < 0) {
+ /* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
+ if (reg == ARB_ERR_CAP_MASTER)
+ return 1;
+ else
+ return 0;
+ }
if (gdev->big_endian)
return ioread32be(gdev->base + offset);
@@ -119,6 +116,16 @@ static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev,
int reg)
return ioread32(gdev->base + offset);
}
+static u64 gisb_read_address(struct brcmstb_gisb_arb_device *gdev)
+{
+ u64 value;
+
+ value = (u64)gisb_read(gdev, ARB_ERR_CAP_ADDR);
+ value |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
+
+ return value;
+}
+
static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
{
int offset = gdev->gisb_offsets[reg];
@@ -185,7 +192,7 @@ static int brcmstb_gisb_arb_decode_addr(struct
brcmstb_gisb_arb_device *gdev,
const char *reason)
{
u32 cap_status;
- unsigned long arb_addr;
+ u64 arb_addr;
u32 master;
const char *m_name;
char m_fmt[11];
@@ -197,10 +204,7 @@ static int brcmstb_gisb_arb_decode_addr(struct
brcmstb_gisb_arb_device *gdev,
return 1;
/* Read the address and master */
- arb_addr = gisb_read(gdev, ARB_ERR_CAP_ADDR) & 0xffffffff;
-#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT))
- arb_addr |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
-#endif
+ arb_addr = gisb_read_address(gdev);
master = gisb_read(gdev, ARB_ERR_CAP_MASTER);
m_name = brcmstb_gisb_master_to_str(gdev, master);
@@ -209,7 +213,7 @@ static int brcmstb_gisb_arb_decode_addr(struct
brcmstb_gisb_arb_device *gdev,
m_name = m_fmt;
}
- pr_crit("%s: %s at 0x%lx [%c %s], core: %s\n",
+ pr_crit("%s: %s at 0x%llx [%c %s], core: %s\n",
__func__, reason, arb_addr,
cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R',
cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "",
--
2.12.0
