Recently most nodes got labels to make them referenceable. The USB 3.0
nodes as well as the nodes for the SATA controllers were left out,
rectify the omission.
Signed-off-by: Ralph Sennhauser <ralph.sennhau...@gmail.com>
---
Hi everybody
In preparation to add support for the Linksys WRT3200ACM (Rango) some
rework of the "dts-stack" is highly desirable. This patch is part of the
preparatory work but independent.
The label for the USB 2.0 port is "usb0:", so using "usb1:" and "usb2:"
would be the logical continuation. Guess you realized the catch already,
"usb2:" for an USB 3.0 controller might be very confusing.
I'm sending this patch ahead of the rest so the labels can be discussed
and finalized.
Ralph
---
arch/arm/boot/dts/armada-38x.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/armada-38x.dtsi
b/arch/arm/boot/dts/armada-38x.dtsi
index ba27ec1..78c838a 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -530,7 +530,7 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
};
- sata@a8000 {
+ satac0: sata@a8000 {
compatible = "marvell,armada-380-ahci";
reg = <0xa8000 0x2000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -546,7 +546,7 @@
status = "disabled";
};
- sata@e0000 {
+ satac1: sata@e0000 {
compatible = "marvell,armada-380-ahci";
reg = <0xe0000 0x2000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
@@ -590,7 +590,7 @@
status = "disabled";
};
- usb3@f0000 {
+ usb3_0: usb3@f0000 {
compatible = "marvell,armada-380-xhci";
reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
@@ -598,7 +598,7 @@
status = "disabled";
};
- usb3@f8000 {
+ usb3_1: usb3@f8000 {
compatible = "marvell,armada-380-xhci";
reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
--
2.10.2
