On 31/03/17 11:07, Shardar Mohammed wrote:
> Verification failed on Tegra.
> Fix here is, IIR should be masked with UART_IIR_MASK after reading the IIR
> register as on Tegra bit-6 is used for internal usage to know if FIFO mode is
> enabled.
> while (1) {
> iir = tegra_uart_read(tup, UART_IIR);
> +iir &= UART_IIR_MASK;
Per Olliver's original email did you pick up the other patch [0] before
applying this because that does apply the mask. I mentioned to Olliver
that this should really be a series, so it is clear that this patch is
dependent upon the other.
> -----Original Message-----
> From: Laxman Dewangan
> Sent: Thursday, March 30, 2017 3:48 PM
> To: Olliver Schinagl <oli...@schinagl.nl>; Greg Kroah-Hartman
> <gre...@linuxfoundation.org>; Jiri Slaby <jsl...@suse.com>; Stephen Warren
> <swar...@wwwdotorg.org>; Thierry Reding <thierry.red...@gmail.com>; Alexandre
> Courbot <gnu...@gmail.com>
> Cc: linux-ser...@vger.kernel.org; linux-te...@vger.kernel.org;
> linux-kernel@vger.kernel.org; Shardar Mohammed <smoham...@nvidia.com>
> Subject: Re: [PATCH] serial: tegra: Map the iir register to default defines
>
>
> On Thursday 30 March 2017 12:18 AM, Olliver Schinagl wrote:
>> The tegra serial IP seems to be following the common layout and the
>> interrupt ID's match up nicely. Replace the magic values to match the
>> common serial_reg defines, with the addition of the Tegra unique End
>> of Data interrupt.
>>
>> Signed-off-by: Olliver Schinagl <oli...@schinagl.nl>
>> ---
>
> Adding Shardar for verifications.
>
> Acked-by: Laxman Dewangan <ldewan...@nvidia.com>
Furthermore does this ACK imply that you have reviewed the other patch
this one is dependent upon?
Cheers
Jon
[0] http://marc.info/?l=linux-serial&m=149081309627392&w=2
--
nvpublic
