sreg->name is only used as an intermediate assign of rdesc->name, plus
another strcmp. Since we already have rdesc->name, no need it anymore.
Cc: Liam Girdwood <lgirdw...@gmail.com>
Cc: Mark Brown <broo...@kernel.org>
Cc: Shawn Guo <shawn...@kernel.org>
Cc: Sascha Hauer <ker...@pengutronix.de>
Cc: Robin Gong <yibin.g...@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.d...@nxp.com>
---
drivers/regulator/anatop-regulator.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/regulator/anatop-regulator.c
b/drivers/regulator/anatop-regulator.c
index 9481730..19eb1f4 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -39,7 +39,6 @@
#define LDO_FET_FULL_ON 0x1f
struct anatop_regulator {
- const char *name;
u32 control_reg;
struct regmap *anatop;
int vol_bit_shift;
@@ -194,12 +193,12 @@ static int anatop_regulator_probe(struct platform_device
*pdev)
if (!sreg)
return -ENOMEM;
- of_property_read_string(np, "regulator-name", &sreg->name);
rdesc = &sreg->rdesc;
- rdesc->name = sreg->name;
rdesc->type = REGULATOR_VOLTAGE;
rdesc->owner = THIS_MODULE;
+ of_property_read_string(np, "regulator-name", &rdesc->name);
+
initdata = of_get_regulator_init_data(dev, np, rdesc);
if (!initdata)
return -ENOMEM;
@@ -299,7 +298,7 @@ static int anatop_regulator_probe(struct platform_device
*pdev)
* a sane default until imx6-cpufreq was probed and changes the
* voltage to the correct value. In this case we set 1.25V.
*/
- if (!sreg->sel && !strcmp(sreg->name, "vddpu"))
+ if (!sreg->sel && !strcmp(rdesc->name, "vddpu"))
sreg->sel = 22;
if (!sreg->bypass && !sreg->sel) {
--
2.7.4
