On Thu, 2017-09-28 at 17:21 +0930, Joel Stanley wrote: > Enable the buses that are in use and the devices that are attached. > Currently that is just the battery backed RTC. > > Some of these buses are for hotplugged cards, such as PCIe cards. Others > do not yet have upstream drivers, so there are no devices attached. > > Signed-off-by: Joel Stanley <[email protected]> > --- > arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 54 > ++++++++++++++++++++++++++++ > 1 file changed, 54 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts > b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts > index 1190fec1b5d0..f79c1d21c47f 100644 > --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts > +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts > @@ -79,3 +79,57 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_rmii1_default>; > }; > + > +&i2c2 { > + status = "okay"; > +}; > + > +&i2c3 { > + status = "okay"; > +}; > + > +&i2c4 { > + status = "okay"; > +}; > + > +&i2c5 { > + status = "okay"; > +}; > + > +&i2c6 { > + /* PCIe slot 1 (x8) */ > + status = "enabled";
This is not okay. Neither are those below.
Cheers,
Andrew
> +};
> +
> +&i2c7 {
> + /* PCIe slot 2 (x16) */
> + status = "enabled";
> +};
> +
> +&i2c8 {
> + /* PCIe slot 3 (x16) */
> + status = "enabled";
> +};
> +
> +&i2c9 {
> + /* PCIe slot 4 (x16) */
> + status = "enabled";
> +};
> +
> +&i2c10 {
> + /* PCIe slot 5 (x8) */
> + status = "enabled";
> +};
> +
> +&i2c11 {
> + status = "okay";
> +
> + rtc@32 {
> + compatible = "epson,rx8900";
> + reg = <0x32>;
> + };
> +};
> +
> +&i2c12 {
> + status = "okay";
> +};
signature.asc
Description: This is a digitally signed message part
