On Wed, Oct 4, 2017 at 2:32 PM, Andrew Jeffery <[email protected]> wrote: > On Thu, 2017-09-28 at 17:21 +0930, Joel Stanley wrote: >> Enable the buses that are in use and the devices that are attached. >> Currently that is just the battery backed RTC. >> >> Some of these buses are for hotplugged cards, such as PCIe cards. Others >> do not yet have upstream drivers, so there are no devices attached. >> >> Signed-off-by: Joel Stanley <[email protected]> >> --- >> arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 54 >> ++++++++++++++++++++++++++++ >> 1 file changed, 54 insertions(+) >> >> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts >> b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts >> index 1190fec1b5d0..f79c1d21c47f 100644 >> --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts >> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts >> @@ -79,3 +79,57 @@ >> pinctrl-names = "default"; >> pinctrl-0 = <&pinctrl_rmii1_default>; >> }; >> + >> +&i2c2 { >> + status = "okay"; >> +}; >> + >> +&i2c3 { >> + status = "okay"; >> +}; >> + >> +&i2c4 { >> + status = "okay"; >> +}; >> + >> +&i2c5 { >> + status = "okay"; >> +}; >> + >> +&i2c6 { >> + /* PCIe slot 1 (x8) */ >> + status = "enabled"; > > This is not okay. Neither are those below.
Hah. Well spotted. Cheers, Joel
