Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's
SoCs. This is required for managing the cpu frequency transitions which are
controlled by firmware.
Signed-off-by: Taniya Das <t...@codeaurora.org>
---
.../bindings/cpufreq/cpufreq-qcom-fw.txt | 173 +++++++++++++++++++++
1 file changed, 173 insertions(+)
create mode 100644
Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
new file mode 100644
index 0000000..e3087ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
@@ -0,0 +1,173 @@
+Qualcomm Technologies, Inc. CPUFREQ Bindings
+
+CPUFREQ FW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
+SoCs to manage frequency in hardware. It is capable of controlling frequency
+for multiple clusters.
+
+Properties:
+- compatible
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,cpufreq-fw".
+
+* Property qcom,freq-domain
+Devices supporting freq-domain must set their "qcom,freq-domain" property with
+phandle to a freq_domain_table in their DT node.
+
+* Frequency Domain Table Node
+
+This describes the frequency domain belonging to a device.
+This node can have following properties:
+
+- reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Addresses and sizes for the memory of the perf
+ , lut and enable bases.
+ perf - indicates the base address for the desired
+ performance state to be set.
+ lut - indicates the look up table base address for the
+ cpufreq driver to read frequencies.
+ enable - indicates the enable register for firmware.
+- reg-names
+ Usage: required
+ Value type: <stringlist>
+ Definition: Address names. Must be "perf", "lut", "enable".
+ Must be specified in the same order as the reg property.
+
+Example:
+
+Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch
+DCVS state together.
+
+/ {
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ qcom,freq-domain = <&freq_domain_table0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ L3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_100>;
+ qcom,freq-domain = <&freq_domain_table0>;
+ L2_100: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ next-level-cache = <&L2_200>;
+ qcom,freq-domain = <&freq_domain_table0>;
+ L2_200: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ next-level-cache = <&L2_300>;
+ qcom,freq-domain = <&freq_domain_table0>;
+ L2_300: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ next-level-cache = <&L2_400>;
+ qcom,freq-domain = <&freq_domain_table1>;
+ L2_400: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ next-level-cache = <&L2_500>;
+ qcom,freq-domain = <&freq_domain_table1>;
+ L2_500: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ next-level-cache = <&L2_600>;
+ qcom,freq-domain = <&freq_domain_table1>;
+ L2_600: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ next-level-cache = <&L2_700>;
+ qcom,freq-domain = <&freq_domain_table1>;
+ L2_700: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+ };
+
+ qcom,cpufreq-fw {
+ compatible = "qcom,cpufreq-fw";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ freq_domain_table0 : freq_table0 {
+ reg = <0x17d43920 0x4>, <0x17d43110 0x500>,
+ <0x17d41000 0x4>;
+ reg-names = "perf", "lut", "enable";
+ };
+
+ freq_domain_table1 : freq_table1 {
+ reg = <0x17d46120 0x4>, <0x17d45910 0x500>,
+ <0x17d45800 0x4> ;
+ reg-names = "perf", "lut", "enable";
+ };
+ };
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
