On Thu, Jun 07, 2018 at 07:12:51PM +0100, Craig Tatlor wrote:
> Add bindings for the Qualcomm Battery Monitoring system.
> 
> Signed-off-by: Craig Tatlor <[email protected]>
> ---
> * Changes from v4:
>   Uses proper units and expands some definitions,
>   along with changing vadc@ to adc@.
> 
>  .../bindings/power/supply/qcom_bms.txt        | 91 +++++++++++++++++++
>  1 file changed, 91 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/power/supply/qcom_bms.txt
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/qcom_bms.txt 
> b/Documentation/devicetree/bindings/power/supply/qcom_bms.txt
> new file mode 100644
> index 000000000000..a1a32d6ab460
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/qcom_bms.txt
> @@ -0,0 +1,91 @@
> +Qualcomm Battery Monitoring System
> +
> +The Qualcomm Battery Monitoring System is found inside of Qualcomm PM8941
> +PMICs. It provides open circuit voltage (OCV) and coulomb counter registers
> +that allow the OS to infer a capacity level.
> +
> +Required properties:
> +- compatible:                   Should contain "qcom,pm8941-bms".
> +- reg:                          Specifies the SPMI address and length of the
> +                             controller's registers.
> +- interrupts:                   OCV threshold interrupt.
> +- io-channels:                  Should contain IIO channel specifier for the
> +                             ADC channel that reports battery temperature.
> +- io-channel-names:             Should contain "temp".
> +- qcom,fcc-temp-legend-celcius: An array containing the temperature, in degC,
> +                             for each column of the full charge capacity
> +                             lookup table.
> +- qcom,fcc-lut-microamp-hours:  An array of full charge capacity values in 
> uah,
> +                             one entry for each temperature defined in in
> +                             qcom,fcc-temp-legend-celcius.
> +- qcom,ocv-temp-legend-celcius: An array containing the temperature, in degC,
> +                             for each column of the OCV lookup table.
> +- qcom,ocv-capacity-legend:     An array containing the capacity for each
> +                             row of the OCV lookup table.
> +- qcom,ocv-lut-microvolt:       An array of OCV values in uV, one entry for 
> each
> +                             capacity defined in qcom,ocv-capacity-legend.

Need to say which of these are 8-bit values.

With that,

Reviewed-by: Rob Herring <[email protected]>

Reply via email to