From: Cyrille Pitchen <cyrille.pitc...@microchip.com>
This patch configures the QSPI0 controller pin muxing and declares
a jedec,spi-nor memory.
sama5d2 Xplained RevB and RevC use the Macronix MX25L25673G flash
memory which advertises a maximum frequency of 80MHz for Quad IO
Fast Read. Set the spi-max-frequency to 80MHz knowing that actually
the QSPI drver will set the SPI bus clock to 166MHz / 3 = 55.3MHz.
Signed-off-by: Cyrille Pitchen <cyrille.pitc...@microchip.com>
[tudor.amba...@microchip.com:
- drop partitions,
- add spi-rx/tx-bus-width
- change spi-max-frequency to match the 80MHz limit advertised by
MX25L25673G for Quad IO Fast Read,
- reword commit message and subject.]
Signed-off-by: Tudor Ambarus <tudor.amba...@microchip.com>
---
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 31 +++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 518e2b095ccf..171bc82cfbbf 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -108,6 +108,21 @@
};
apb {
+ qspi0: spi@f0020000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi0_default>;
+ /* status = "okay"; */ /* conflict with sdmmc1
*/
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ m25p,fast-read;
+ };
+ };
+
spi0: spi@f8000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0_default>;
@@ -485,6 +500,22 @@
bias-disable;
};
+ pinctrl_qspi0_default: qspi0_default {
+ sck_cs {
+ pinmux = <PIN_PA22__QSPI0_SCK>,
+ <PIN_PA23__QSPI0_CS>;
+ bias-disable;
+ };
+
+ data {
+ pinmux = <PIN_PA24__QSPI0_IO0>,
+ <PIN_PA25__QSPI0_IO1>,
+ <PIN_PA26__QSPI0_IO2>,
+ <PIN_PA27__QSPI0_IO3>;
+ bias-pull-up;
+ };
+ };
+
pinctrl_sdmmc0_default: sdmmc0_default {
cmd_data {
pinmux = <PIN_PA1__SDMMC0_CMD>,
--
2.9.4
