The reset signal of the SSD1306 OLED display is actually active-low. Adapt the DT to reflect the real world.
Reviewed-by: Rob Herring <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Signed-off-by: Michal Vokáč <[email protected]> --- Changes in v2 resend: - Add Acked-by from Alexandre. Changes from v1: - Add R-by from Rob arch/arm/boot/dts/imx28-cfa10036.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index d3e3622..de48b58 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "imx28.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Crystalfontz CFA-10036 Board"; @@ -96,7 +97,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ssd1306_cfa10036>; reg = <0x3c>; - reset-gpios = <&gpio2 7 0>; + reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; solomon,height = <32>; solomon,width = <128>; solomon,page-offset = <0>; -- 2.1.4
