The reset-active-low property has been removed brom the binding a while
ago. So remove it from the examples as well.
Fixes: 519b4db ("fbdev: ssd1307fb: Remove reset-active-low from the DT binding
document")
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Alexandre Belloni <[email protected]>
Signed-off-by: Michal Vokáč <[email protected]>
---
Changes in v2 resend:
- Add R-by from Alexandre.
Changes from v1:
- Add R-by from Rob
Documentation/devicetree/bindings/display/ssd1307fb.txt | 2 --
1 file changed, 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt
b/Documentation/devicetree/bindings/display/ssd1307fb.txt
index 209d931..b67f8ca 100644
--- a/Documentation/devicetree/bindings/display/ssd1307fb.txt
+++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt
@@ -36,7 +36,6 @@ ssd1307: oled@3c {
reg = <0x3c>;
pwms = <&pwm 4 3000>;
reset-gpios = <&gpio2 7>;
- reset-active-low;
};
ssd1306: oled@3c {
@@ -44,7 +43,6 @@ ssd1306: oled@3c {
reg = <0x3c>;
pwms = <&pwm 4 3000>;
reset-gpios = <&gpio2 7>;
- reset-active-low;
solomon,com-lrremap;
solomon,com-invdir;
solomon,com-offset = <32>;
--
2.1.4
