Hi Ondrej,
On Tue, 4 Jun 2019 at 17:40, megous via linux-sunxi
<linux-su...@googlegroups.com> wrote:
>
> From: Ondrej Jirman <meg...@megous.com>
>
> The current code defines W1 clock gate to be at 0x1cc, overlaying it
> with the IR gate.
>
> Clock gate for r-apb1-w1 is at 0x1ec. This fixes issues with IR receiver
> causing interrupt floods on H6 (because interrupt flags can't be cleared,
> due to IR module's bus being disabled).
>
> Signed-off-by: Ondrej Jirman <meg...@megous.com>
> Fixes: b7c7b05065aa77ae ("clk: sunxi-ng: add support for H6 PRCM CCU")
> ---
> drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
> b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
> index 27554eaf6929..8d05d4f1f8a1 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
> @@ -104,7 +104,7 @@ static SUNXI_CCU_GATE(r_apb2_i2c_clk, "r-apb2-i2c",
> "r-apb2",
> static SUNXI_CCU_GATE(r_apb1_ir_clk, "r-apb1-ir", "r-apb1",
> 0x1cc, BIT(0), 0);
> static SUNXI_CCU_GATE(r_apb1_w1_clk, "r-apb1-w1", "r-apb1",
> - 0x1cc, BIT(0), 0);
> + 0x1ec, BIT(0), 0);
Just for information where did you find this information?
Using the vendor kernel or user manual?
Thanks,
Clément
>
> /* Information of IR(RX) mod clock is gathered from BSP source code */
> static const char * const r_mod0_default_parents[] = { "osc32k", "osc24M" };
> --
> 2.21.0
>
> --
> You received this message because you are subscribed to the Google Groups
> "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to linux-sunxi+unsubscr...@googlegroups.com.
> To view this discussion on the web, visit
> https://groups.google.com/d/msgid/linux-sunxi/20190604154036.23211-1-megous%40megous.com.
> For more options, visit https://groups.google.com/d/optout.
