We don't need to check for packet length more than once, so drop the
extra check in ziirave_firm_upload(). While at it move the check at
the very start of __ziirave_firm_write_pkt(), as to not waste any time
preparing a packet we'll never use.
Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
Cc: Chris Healy <cphe...@gmail.com>
Cc: Guenter Roeck <li...@roeck-us.net>
Cc: Rick Ramstetter <r...@anteaterllc.com>
Cc: linux-watch...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/watchdog/ziirave_wdt.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/watchdog/ziirave_wdt.c b/drivers/watchdog/ziirave_wdt.c
index b2d5ff0c22fe..9d9c669b8b47 100644
--- a/drivers/watchdog/ziirave_wdt.c
+++ b/drivers/watchdog/ziirave_wdt.c
@@ -253,6 +253,13 @@ static int __ziirave_firm_write_pkt(struct watchdog_device
*wdd,
u8 i, checksum = 0, packet[ZIIRAVE_FIRM_PKT_TOTAL_SIZE];
int ret;
+ /* Check max data size */
+ if (len > ZIIRAVE_FIRM_PKT_DATA_SIZE) {
+ dev_err(&client->dev, "Firmware packet too long (%d)\n",
+ len);
+ return -EMSGSIZE;
+ }
+
memset(packet, 0, ARRAY_SIZE(packet));
/* Packet length */
@@ -261,9 +268,6 @@ static int __ziirave_firm_write_pkt(struct watchdog_device
*wdd,
packet[1] = addr16 & 0xff;
packet[2] = (addr16 & 0xff00) >> 8;
- /* Packet data */
- if (len > ZIIRAVE_FIRM_PKT_DATA_SIZE)
- return -EMSGSIZE;
memcpy(packet + 3, data, len);
/* Packet checksum */
@@ -382,13 +386,6 @@ static int ziirave_firm_upload(struct watchdog_device *wdd,
if (!be16_to_cpu(rec->len))
break;
- /* Check max data size */
- if (be16_to_cpu(rec->len) > ZIIRAVE_FIRM_PKT_DATA_SIZE) {
- dev_err(&client->dev, "Firmware packet too long (%d)\n",
- be16_to_cpu(rec->len));
- return -EMSGSIZE;
- }
-
ret = ziirave_firm_write_pkt(wdd, be32_to_cpu(rec->addr),
rec->data, be16_to_cpu(rec->len));
if (ret)
--
2.21.0
