Bootloader firmware expects the following traffic for DOWNLOAD_END: S Addr Wr [A] 0x11 [A] P
using ziirave_firm_write_byte() will result in S Addr Wr [A] 0x11 [A] 0x01 [A] 0x01 [A] P which happens to work because firmware will ignore any extra bytes sent. Fix this by converting the code to use i2c_smbus_write_byte() instead. Signed-off-by: Andrey Smirnov <[email protected]> Cc: Chris Healy <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Rick Ramstetter <[email protected]> Cc: [email protected] Cc: [email protected] --- drivers/watchdog/ziirave_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/ziirave_wdt.c b/drivers/watchdog/ziirave_wdt.c index 0185b9175cc0..a598780d73d3 100644 --- a/drivers/watchdog/ziirave_wdt.c +++ b/drivers/watchdog/ziirave_wdt.c @@ -425,7 +425,7 @@ static int ziirave_firm_upload(struct watchdog_device *wdd, } /* End download operation */ - ret = ziirave_firm_write_byte(wdd, ZIIRAVE_CMD_DOWNLOAD_END, 1, false); + ret = i2c_smbus_write_byte(client, ZIIRAVE_CMD_DOWNLOAD_END); if (ret) { dev_err(&client->dev, "Failed to end firmware download: %d\n", ret); -- 2.21.0
