On 20-08-19, 14:26, Niklas Cassel wrote: > On Tue, Aug 20, 2019 at 12:12:13PM +0530, Vinod Koul wrote: > > This add base DTS file for sm8150-mtp and enables boot to console, adds > > tlmm reserved range, resin node, volume down key and also includes pmic > > file. > > > > Signed-off-by: Vinod Koul <[email protected]> > > --- > > arch/arm64/boot/dts/qcom/Makefile | 1 + > > arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 48 +++++++++++++++++++++++++ > > 2 files changed, 49 insertions(+) > > create mode 100644 arch/arm64/boot/dts/qcom/sm8150-mtp.dts > > > > diff --git a/arch/arm64/boot/dts/qcom/Makefile > > b/arch/arm64/boot/dts/qcom/Makefile > > index 0a7e5dfce6f7..1964dacaf19b 100644 > > --- a/arch/arm64/boot/dts/qcom/Makefile > > +++ b/arch/arm64/boot/dts/qcom/Makefile > > @@ -12,5 +12,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb > > +dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb > > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb > > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > > diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts > > b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts > > new file mode 100644 > > index 000000000000..80b15f4f07c8 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts > > @@ -0,0 +1,48 @@ > > +// SPDX-License-Identifier: BSD-3-Clause > > +// Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. > > +// Copyright (c) 2019, Linaro Limited > > + > > +/dts-v1/; > > + > > +#include "sm8150.dtsi" > > +#include "pm8150.dtsi" > > +#include "pm8150b.dtsi" > > +#include "pm8150l.dtsi" > > + > > +/ { > > + model = "Qualcomm Technologies, Inc. SM8150 MTP"; > > + compatible = "qcom,sm8150-mtp"; > > + > > + aliases { > > + serial0 = &uart2; > > + }; > > + > > + chosen { > > + stdout-path = "serial0:115200n8"; > > + }; > > +}; > > + > > +&qupv3_id_1 { > > + status = "okay"; > > +}; > > + > > +&pon { > > + pwrkey { > > + status = "okay"; > > + }; > > + > > + resin { > > + compatible = "qcom,pm8941-resin"; > > + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; > > + debounce = <15625>; > > + bias-pull-up; > > + linux,code = <KEY_VOLUMEDOWN>; > > + }; > > +}; > > Missing a newline here.
Yup will updated -- ~Vinod
