[PATCH 4/5] arm64: dts: meson-sm1-sei610: add HDMI display support

[Neil Armstrong]

Update compatible of the pwc-vpu node and add the HDMI support nodes
for the Amlogic SM1 Based SEI610 Board.

Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
---
 .../boot/dts/amlogic/meson-sm1-sei610.dts     | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts 
b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 12dab0ba2f26..66bd3bfbaf91 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -51,6 +51,17 @@
                };
        };
 
+       hdmi-connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_connector_in: endpoint {
+                               remote-endpoint = <&hdmi_tx_tmds_out>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
 
@@ -177,6 +188,18 @@
        phy-mode = "rmii";
 };
 
+&hdmi_tx {
+       status = "okay";
+       pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+       pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+       hdmi_tx_tmds_out: endpoint {
+               remote-endpoint = <&hdmi_connector_in>;
+       };
+};
+
 &i2c3 {
        status = "okay";
        pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
-- 
2.22.0