Neil Armstrong <narmstr...@baylibre.com> writes:
> Update compatible of the pwc-vpu node and add the HDMI support nodes
> for the Amlogic SM1 Based SEI610 Board.
I think this changelog is out of date. It's not doing anything with the
VPU pwrc node.
Kevin
> Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
> ---
> .../boot/dts/amlogic/meson-sm1-sei610.dts | 23 +++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> index 12dab0ba2f26..66bd3bfbaf91 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> @@ -51,6 +51,17 @@
> };
> };
>
> + hdmi-connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_connector_in: endpoint {
> + remote-endpoint = <&hdmi_tx_tmds_out>;
> + };
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
>
> @@ -177,6 +188,18 @@
> phy-mode = "rmii";
> };
>
> +&hdmi_tx {
> + status = "okay";
> + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&hdmi_tx_tmds_port {
> + hdmi_tx_tmds_out: endpoint {
> + remote-endpoint = <&hdmi_connector_in>;
> + };
> +};
> +
> &i2c3 {
> status = "okay";
> pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
> --
> 2.22.0
