On Wed, Jun 17, 2020 at 09:32:55AM +0800, Jacky Hu wrote: > With this patch applied, output from 4800H (idle) looks as follows: > > k10temp-pci-00c3 > Adapter: PCI adapter > Vcore: 1.55 V > Vsoc: 1.55 V > Tctl: +49.6°C > Tdie: +49.6°C > Icore: 0.00 A > Isoc: 0.00 A > > Signed-off-by: Jacky Hu <hengqing...@gmail.com> > --- > drivers/hwmon/k10temp.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c > index 8f12995ec133..287e9cf2aab9 100644 > --- a/drivers/hwmon/k10temp.c > +++ b/drivers/hwmon/k10temp.c > @@ -583,6 +583,7 @@ static int k10temp_probe(struct pci_dev *pdev, const > struct pci_device_id *id) > k10temp_get_ccd_support(pdev, data, 4); > break; > case 0x31: /* Zen2 Threadripper */ > + case 0x60: /* Zen2 APU */
Unfortunately it is not that simple. Output above and the little data I have available suggests that current and voltage measurements are different on the APU. That means that show_current must remain false. This will require a separate case statement which doesn't set any flags. Guenter > case 0x71: /* Zen2 */ > data->show_current = !is_threadripper() && !is_epyc(); > data->cfactor[0] = CFACTOR_ICORE; > -- > 2.27.0 >
