Hi Guenter, By increasing the regs count from 32 to 256 and looking into the output of `cat /sys/kernel/debug/k10temp-0000\:00\:18.3/svi` There is some data from 0x05a300 - 0x05a330 Do you have any idea how we can guess the offset for this model?
0x05a000: 00000000 00000000 00000000 00000000 0x05a010: 00000000 00000000 00000000 00000000 0x05a020: 00000000 00000000 00000000 00000000 0x05a030: 00000000 00000000 00000000 00000000 0x05a040: 00000000 00000000 00000000 00000000 0x05a050: 00000000 00000000 00000000 00000000 0x05a060: 00000000 00000000 00000000 00000000 0x05a070: 00000000 00000000 00000000 00000000 0x05a080: 00000000 00000000 00000000 00000000 0x05a090: 00000000 00000000 00000000 00000000 0x05a0a0: 00000000 00000000 00000000 00000000 0x05a0b0: 00000000 00000000 00000000 00000000 0x05a0c0: 00000000 00000000 00000000 00000000 0x05a0d0: 00000000 00000000 00000000 00000000 0x05a0e0: 00000000 00000000 00000000 00000000 0x05a0f0: 00000000 00000000 00000000 00000000 0x05a100: 00000000 00000000 00000000 00000000 0x05a110: 00000000 00000000 00000000 00000000 0x05a120: 00000000 00000000 00000000 00000000 0x05a130: 00000000 00000000 00000000 00000000 0x05a140: 00000000 00000000 00000000 00000000 0x05a150: 00000000 00000000 00000000 00000000 0x05a160: 00000000 00000000 00000000 00000000 0x05a170: 00000000 00000000 00000000 00000000 0x05a180: 00000000 00000000 00000000 00000000 0x05a190: 00000000 00000000 00000000 00000000 0x05a1a0: 00000000 00000000 00000000 00000000 0x05a1b0: 00000000 00000000 00000000 00000000 0x05a1c0: 00000000 00000000 00000000 00000000 0x05a1d0: 00000000 00000000 00000000 00000000 0x05a1e0: 00000000 00000000 00000000 00000000 0x05a1f0: 00000000 00000000 00000000 00000000 0x05a200: 00000000 00000000 00000000 00000000 0x05a210: 00000000 00000000 00000000 00000000 0x05a220: 00000000 00000000 00000000 00000000 0x05a230: 00000000 00000000 00000000 00000000 0x05a240: 00000000 00000000 00000000 00000000 0x05a250: 00000000 00000000 00000000 00000000 0x05a260: 00000000 00000000 00000000 00000000 0x05a270: 00000000 00000000 00000000 00000000 0x05a280: 00000000 00000000 00000000 00000000 0x05a290: 00000000 00000000 00000000 00000000 0x05a2a0: 00000000 00000000 00000000 00000000 0x05a2b0: 00000000 00000000 00000000 00000000 0x05a2c0: 00000000 00000000 00000000 00000000 0x05a2d0: 00000000 00000000 00000000 00000000 0x05a2e0: 00000000 00000000 00000000 00000000 0x05a2f0: 00000000 00000000 00000000 00000000 0x05a300: 00000000 00000001 00000000 00002710 0x05a310: 00000000 00000008 0000000e 00000000 0x05a320: 00000001 0000c000 00000000 0000000b 0x05a330: 00000001 00000000 00000000 00000000 0x05a340: 00000000 00000000 00000000 00000000 0x05a350: 00000000 00000000 00000000 00000000 0x05a360: 00000000 00000000 00000000 00000000 0x05a370: 00000000 00000000 00000000 00000000 0x05a380: 00000000 00000000 00000000 00000000 0x05a390: 00000000 00000000 00000000 00000000 0x05a3a0: 00000000 00000000 00000000 00000000 0x05a3b0: 00000000 00000000 00000000 00000000 0x05a3c0: 00000000 00000000 00000000 00000000 0x05a3d0: 00000000 00000000 00000000 00000000 0x05a3e0: 00000000 00000000 00000000 00000000 0x05a3f0: 00000000 00000000 00000000 00000000 Thanks. Jacky On Tue, Jun 16, 2020 at 08:40:28PM -0700, Guenter Roeck wrote: > On Wed, Jun 17, 2020 at 09:32:55AM +0800, Jacky Hu wrote: > > With this patch applied, output from 4800H (idle) looks as follows: > > > > k10temp-pci-00c3 > > Adapter: PCI adapter > > Vcore: 1.55 V > > Vsoc: 1.55 V > > Tctl: +49.6°C > > Tdie: +49.6°C > > Icore: 0.00 A > > Isoc: 0.00 A > > > > Signed-off-by: Jacky Hu <hengqing...@gmail.com> > > --- > > drivers/hwmon/k10temp.c | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c > > index 8f12995ec133..287e9cf2aab9 100644 > > --- a/drivers/hwmon/k10temp.c > > +++ b/drivers/hwmon/k10temp.c > > @@ -583,6 +583,7 @@ static int k10temp_probe(struct pci_dev *pdev, const > > struct pci_device_id *id) > > k10temp_get_ccd_support(pdev, data, 4); > > break; > > case 0x31: /* Zen2 Threadripper */ > > + case 0x60: /* Zen2 APU */ > > Unfortunately it is not that simple. Output above and the little data I have > available suggests that current and voltage measurements are different on the > APU. That means that show_current must remain false. > This will require a separate case statement which doesn't set any flags. > > Guenter > > > case 0x71: /* Zen2 */ > > data->show_current = !is_threadripper() && !is_epyc(); > > data->cfactor[0] = CFACTOR_ICORE; > > -- > > 2.27.0 > >
