Use common device parameter initialization function instead of initialziing those parameters by vendor driver itself.
Signed-off-by: Stanley Chu <[email protected]> --- drivers/scsi/ufs/ufs-mediatek.c | 16 +++------------- drivers/scsi/ufs/ufs-mediatek.h | 16 ---------------- 2 files changed, 3 insertions(+), 29 deletions(-) diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c index b9b423752ee1..87b4bf125e23 100644 --- a/drivers/scsi/ufs/ufs-mediatek.c +++ b/drivers/scsi/ufs/ufs-mediatek.c @@ -680,19 +680,9 @@ static int ufs_mtk_pre_pwr_change(struct ufs_hba *hba, u32 adapt_val; int ret; - host_cap.tx_lanes = UFS_MTK_LIMIT_NUM_LANES_TX; - host_cap.rx_lanes = UFS_MTK_LIMIT_NUM_LANES_RX; - host_cap.hs_rx_gear = UFS_MTK_LIMIT_HSGEAR_RX; - host_cap.hs_tx_gear = UFS_MTK_LIMIT_HSGEAR_TX; - host_cap.pwm_rx_gear = UFS_MTK_LIMIT_PWMGEAR_RX; - host_cap.pwm_tx_gear = UFS_MTK_LIMIT_PWMGEAR_TX; - host_cap.rx_pwr_pwm = UFS_MTK_LIMIT_RX_PWR_PWM; - host_cap.tx_pwr_pwm = UFS_MTK_LIMIT_TX_PWR_PWM; - host_cap.rx_pwr_hs = UFS_MTK_LIMIT_RX_PWR_HS; - host_cap.tx_pwr_hs = UFS_MTK_LIMIT_TX_PWR_HS; - host_cap.hs_rate = UFS_MTK_LIMIT_HS_RATE; - host_cap.desired_working_mode = - UFS_MTK_LIMIT_DESIRED_MODE; + ufshcd_init_pwr_dev_param(&host_cap); + host_cap.hs_rx_gear = UFS_HS_G4; + host_cap.hs_tx_gear = UFS_HS_G4; ret = ufshcd_get_pwr_dev_param(&host_cap, dev_max_params, diff --git a/drivers/scsi/ufs/ufs-mediatek.h b/drivers/scsi/ufs/ufs-mediatek.h index ac37b11803fb..93d35097dfb0 100644 --- a/drivers/scsi/ufs/ufs-mediatek.h +++ b/drivers/scsi/ufs/ufs-mediatek.h @@ -30,22 +30,6 @@ #define REFCLK_REQ_TIMEOUT_US 3000 -/* - * Vendor specific pre-defined parameters - */ -#define UFS_MTK_LIMIT_NUM_LANES_RX 2 -#define UFS_MTK_LIMIT_NUM_LANES_TX 2 -#define UFS_MTK_LIMIT_HSGEAR_RX UFS_HS_G4 -#define UFS_MTK_LIMIT_HSGEAR_TX UFS_HS_G4 -#define UFS_MTK_LIMIT_PWMGEAR_RX UFS_PWM_G4 -#define UFS_MTK_LIMIT_PWMGEAR_TX UFS_PWM_G4 -#define UFS_MTK_LIMIT_RX_PWR_PWM SLOW_MODE -#define UFS_MTK_LIMIT_TX_PWR_PWM SLOW_MODE -#define UFS_MTK_LIMIT_RX_PWR_HS FAST_MODE -#define UFS_MTK_LIMIT_TX_PWR_HS FAST_MODE -#define UFS_MTK_LIMIT_HS_RATE PA_HS_MODE_B -#define UFS_MTK_LIMIT_DESIRED_MODE UFS_HS_MODE - /* * Other attributes */ -- 2.18.0
