Use common device parameter initialization function instead of initialziing those parameters by vendor driver itself.
Signed-off-by: Stanley Chu <[email protected]> --- drivers/scsi/ufs/ufs-hisi.c | 13 +------------ drivers/scsi/ufs/ufs-hisi.h | 13 ------------- 2 files changed, 1 insertion(+), 25 deletions(-) diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c index 074a6a055a4c..0aa58131e791 100644 --- a/drivers/scsi/ufs/ufs-hisi.c +++ b/drivers/scsi/ufs/ufs-hisi.c @@ -293,18 +293,7 @@ static int ufs_hisi_link_startup_notify(struct ufs_hba *hba, static void ufs_hisi_set_dev_cap(struct ufs_dev_params *hisi_param) { - hisi_param->rx_lanes = UFS_HISI_LIMIT_NUM_LANES_RX; - hisi_param->tx_lanes = UFS_HISI_LIMIT_NUM_LANES_TX; - hisi_param->hs_rx_gear = UFS_HISI_LIMIT_HSGEAR_RX; - hisi_param->hs_tx_gear = UFS_HISI_LIMIT_HSGEAR_TX; - hisi_param->pwm_rx_gear = UFS_HISI_LIMIT_PWMGEAR_RX; - hisi_param->pwm_tx_gear = UFS_HISI_LIMIT_PWMGEAR_TX; - hisi_param->rx_pwr_pwm = UFS_HISI_LIMIT_RX_PWR_PWM; - hisi_param->tx_pwr_pwm = UFS_HISI_LIMIT_TX_PWR_PWM; - hisi_param->rx_pwr_hs = UFS_HISI_LIMIT_RX_PWR_HS; - hisi_param->tx_pwr_hs = UFS_HISI_LIMIT_TX_PWR_HS; - hisi_param->hs_rate = UFS_HISI_LIMIT_HS_RATE; - hisi_param->desired_working_mode = UFS_HISI_LIMIT_DESIRED_MODE; + ufshcd_init_pwr_dev_param(hisi_param); } static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba) diff --git a/drivers/scsi/ufs/ufs-hisi.h b/drivers/scsi/ufs/ufs-hisi.h index 3231d3d81c98..5a90c0f4e90c 100644 --- a/drivers/scsi/ufs/ufs-hisi.h +++ b/drivers/scsi/ufs/ufs-hisi.h @@ -76,19 +76,6 @@ enum { #define SLOW 1 #define FAST 2 -#define UFS_HISI_LIMIT_NUM_LANES_RX 2 -#define UFS_HISI_LIMIT_NUM_LANES_TX 2 -#define UFS_HISI_LIMIT_HSGEAR_RX UFS_HS_G3 -#define UFS_HISI_LIMIT_HSGEAR_TX UFS_HS_G3 -#define UFS_HISI_LIMIT_PWMGEAR_RX UFS_PWM_G4 -#define UFS_HISI_LIMIT_PWMGEAR_TX UFS_PWM_G4 -#define UFS_HISI_LIMIT_RX_PWR_PWM SLOW_MODE -#define UFS_HISI_LIMIT_TX_PWR_PWM SLOW_MODE -#define UFS_HISI_LIMIT_RX_PWR_HS FAST_MODE -#define UFS_HISI_LIMIT_TX_PWR_HS FAST_MODE -#define UFS_HISI_LIMIT_HS_RATE PA_HS_MODE_B -#define UFS_HISI_LIMIT_DESIRED_MODE FAST - #define UFS_HISI_CAP_RESERVED BIT(0) #define UFS_HISI_CAP_PHY10nm BIT(1) -- 2.18.0
