Add SCMIv3.0 Sensor support for CONFIG_GET/CONFIG_SET commands.

Signed-off-by: Cristian Marussi <cristian.maru...@arm.com>
---
 drivers/firmware/arm_scmi/sensors.c | 75 +++++++++++++++++++++++++++++
 include/linux/scmi_protocol.h       | 37 ++++++++++++++
 2 files changed, 112 insertions(+)

diff --git a/drivers/firmware/arm_scmi/sensors.c 
b/drivers/firmware/arm_scmi/sensors.c
index 0adc545116a4..fa3385045361 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -22,6 +22,8 @@ enum scmi_sensor_protocol_cmd {
        SENSOR_READING_GET = 0x6,
        SENSOR_AXIS_DESCRIPTION_GET = 0x7,
        SENSOR_LIST_UPDATE_INTERVALS = 0x8,
+       SENSOR_CONFIG_GET = 0x9,
+       SENSOR_CONFIG_SET = 0xA,
 };
 
 struct scmi_msg_resp_sensor_attributes {
@@ -150,6 +152,19 @@ struct scmi_msg_set_sensor_trip_point {
        __le32 value_high;
 };
 
+struct scmi_msg_sensor_config_get {
+       __le32 id;
+};
+
+struct scmi_resp_sensor_config_get {
+       __le32 sensor_config;
+};
+
+struct scmi_msg_sensor_config_set {
+       __le32 id;
+       __le32 sensor_config;
+};
+
 struct scmi_msg_sensor_reading_get {
        __le32 id;
        __le32 flags;
@@ -597,6 +612,64 @@ scmi_sensor_trip_point_config(const struct scmi_handle 
*handle, u32 sensor_id,
        return ret;
 }
 
+static int scmi_sensor_config_get(const struct scmi_handle *handle,
+                                 u32 sensor_id, u32 *sensor_config)
+{
+       int ret;
+       struct scmi_xfer *t;
+       struct scmi_msg_sensor_config_get *msg;
+       struct scmi_resp_sensor_config_get *resp;
+
+       ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_GET,
+                                SCMI_PROTOCOL_SENSOR, sizeof(*msg),
+                                sizeof(*resp), &t);
+       if (ret)
+               return ret;
+
+       msg = t->tx.buf;
+       msg->id = cpu_to_le32(sensor_id);
+       ret = scmi_do_xfer(handle, t);
+       if (!ret) {
+               struct sensors_info *si = handle->sensor_priv;
+               struct scmi_sensor_info *s = si->sensors + sensor_id;
+
+               resp = t->rx.buf;
+               *sensor_config = le32_to_cpu(resp->sensor_config);
+               s->sensor_config = *sensor_config;
+       }
+
+       scmi_xfer_put(handle, t);
+       return ret;
+}
+
+static int scmi_sensor_config_set(const struct scmi_handle *handle,
+                                 u32 sensor_id, u32 sensor_config)
+{
+       int ret;
+       struct scmi_xfer *t;
+       struct scmi_msg_sensor_config_set *msg;
+
+       ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_SET,
+                                SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &t);
+       if (ret)
+               return ret;
+
+       msg = t->tx.buf;
+       msg->id = cpu_to_le32(sensor_id);
+       msg->sensor_config = cpu_to_le32(sensor_config);
+
+       ret = scmi_do_xfer(handle, t);
+       if (!ret) {
+               struct sensors_info *si = handle->sensor_priv;
+               struct scmi_sensor_info *s = si->sensors + sensor_id;
+
+               s->sensor_config = sensor_config;
+       }
+
+       scmi_xfer_put(handle, t);
+       return ret;
+}
+
 /**
  * scmi_sensor_reading_get  - Read scalar sensor value
  * @handle: Platform handle
@@ -754,6 +827,8 @@ static const struct scmi_sensor_ops sensor_ops = {
        .trip_point_config = scmi_sensor_trip_point_config,
        .reading_get = scmi_sensor_reading_get,
        .reading_get_timestamped = scmi_sensor_reading_get_timestamped,
+       .config_get = scmi_sensor_config_get,
+       .config_set = scmi_sensor_config_set,
 };
 
 static int scmi_sensor_set_notify_enabled(const struct scmi_handle *handle,
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 072d8f9fc42a..32d18457b6c6 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -286,7 +286,38 @@ struct scmi_sensor_info {
        unsigned int num_axis;
        struct scmi_sensor_axis_info *axis;
        struct scmi_sensor_intervals_info intervals;
+       unsigned int sensor_config;
+#define SCMI_SENS_CFG_UPDATE_SECS_MASK         GENMASK(31, 16)
+#define SCMI_SENS_CFG_GET_UPDATE_SECS(x)                               \
+       FIELD_GET(SCMI_SENS_CFG_UPDATE_SECS_MASK, (x))
+
+#define SCMI_SENS_CFG_UPDATE_EXP_MASK          GENMASK(15, 11)
+#define SCMI_SENS_CFG_GET_UPDATE_EXP(x)                                        
\
+       ({                                                              \
+               int __signed_exp =                                      \
+                       FIELD_GET(SCMI_SENS_CFG_UPDATE_EXP_MASK, (x));  \
+                                                                       \
+               if (__signed_exp & BIT(4))                              \
+                       __signed_exp |= GENMASK(31, 5);                 \
+               __signed_exp;                                           \
+       })
+
+#define SCMI_SENS_CFG_ROUND_MASK               GENMASK(10, 9)
+#define SCMI_SENS_CFG_ROUND_AUTO               2
+#define SCMI_SENS_CFG_ROUND_UP                 1
+#define SCMI_SENS_CFG_ROUND_DOWN               0
+
+#define SCMI_SENS_CFG_TSTAMP_ENABLED_MASK      BIT(1)
+#define SCMI_SENS_CFG_TSTAMP_ENABLE            1
+#define SCMI_SENS_CFG_TSTAMP_DISABLE           0
+#define SCMI_SENS_CFG_IS_TSTAMP_ENABLED(x)                             \
+       FIELD_GET(SCMI_SENS_CFG_TSTAMP_ENABLED_MASK, (x))
+
+#define SCMI_SENS_CFG_SENSOR_ENABLED_MASK      BIT(0)
+#define SCMI_SENS_CFG_SENSOR_ENABLE            1
+#define SCMI_SENS_CFG_SENSOR_DISABLE           0
        char name[SCMI_MAX_STR_SIZE];
+#define SCMI_SENS_CFG_IS_ENABLED(x)            FIELD_GET(BIT(0), (x))
        bool extended_scalar_attrs;
        unsigned int sensor_power;
        unsigned int resolution;
@@ -410,6 +441,8 @@ enum scmi_sensor_class {
  *                          Supports multi-axis sensors for sensors which
  *                          supports it and if the @reading array size of
  *                          @count entry equals the sensor num_axis
+ * @config_get: Get sensor current configuration
+ * @config_set: Set sensor current configuration
  */
 struct scmi_sensor_ops {
        int (*count_get)(const struct scmi_handle *handle);
@@ -422,6 +455,10 @@ struct scmi_sensor_ops {
        int (*reading_get_timestamped)(const struct scmi_handle *handle,
                                       u32 sensor_id, u8 count,
                                       struct scmi_sensor_reading *readings);
+       int (*config_get)(const struct scmi_handle *handle,
+                         u32 sensor_id, u32 *sensor_config);
+       int (*config_set)(const struct scmi_handle *handle,
+                         u32 sensor_id, u32 sensor_config);
 };
 
 /**
-- 
2.17.1

Reply via email to