On Wed, 17 Jan 2001, Petr Matula wrote: > > I did the changes above to 2.4.0 source. Did you also remove the two lines that disabled pirq routing if an IO-APIC was enabled? > Kernel with these changes can't detect my SCSI drive. It prints these messages > in cycle: Which SCSI adapter is this? It may be that you have one of the drivers that does not do "pci_enable_dev()" at initialization time.. Linus - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
- RE: int. assignment on SMP + ServerWorks chipset Linus Torvalds
- Re: int. assignment on SMP + ServerWorks chipset Tim Hockin
- Overriding BIOS settings with kernel 2.4.0 bandit2
- Re: Overriding BIOS settings with kernel 2.4.0 Matt Kemner
- Re: int. assignment on SMP + ServerWorks chipset Petr Matula
- Re: int. assignment on SMP + ServerWorks chipset Andre Hedrick
- Re: int. assignment on SMP + ServerWorks chipset Linus Torvalds
- RE: int. assignment on SMP + ServerWorks chipset Duncan Laurie
- Re: int. assignment on SMP + ServerWorks chipset Petr Matula
- Re: int. assignment on SMP + ServerWorks chipset Petr Matula
- Re: int. assignment on SMP + ServerWorks chips... Duncan Laurie
- Re: int. assignment on SMP + ServerWorks c... Randy.Dunlap
- Re: int. assignment on SMP + ServerWo... Duncan Laurie
- Re: int. assignment on SMP + ServerWorks c... Petr Matula
- RE: int. assignment on SMP + ServerWorks chipset Dunlap, Randy
- RE: int. assignment on SMP + ServerWorks chipset Dunlap, Randy