Duncan Laurie wrote:
>
...
>
> The output you are looking for should look something like this:
>
> Device 00:0f.0 (slot 0): ISA bridge
> INTA: link 0x01, irq mask 0x0400 [10]
...
> Good luck, and feel free to send me the output from "dump_pirq"
> and "mptable" if it doesn't work..
Hi Duncan,
(BTW, it's an STL2 board, not SBT2. And it's Randy, not Mr. Dunlap. :)
Here's my output from dump_pirq. Is the PCI router info unique
enough so that you'll need to debug it instead of me doing so?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[root@localhost src]# ./dump_pirq
Interrupt routing table found at address 0xfdf10
Version 1.0, 0 bytes
Interrupt router is device ff:1f.7
PCI exclusive interrupt mask: 0x0000 []
Interrupt router at ff:1f.7:
Could not read router info from /proc/bus/pci/ff/1f.7.
[root@localhost src]#
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks,
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
