From: Mingchuang Qiao <mingchuang.q...@mediatek.com>

In bus scan flow, the "LTR Mechanism Enable" bit of DEVCTL2 register is
configured in pci_configure_ltr(). If device and bridge both support LTR
mechanism, the "LTR Mechanism Enable" bit of device and bridge will be
enabled in DEVCTL2 register. And pci_dev->ltr_path will be set as 1.

If PCIe link goes down when device resets, the "LTR Mechanism Enable" bit
of bridge will change to 0 according to PCIe r5.0, sec 7.5.3.16. However,
the pci_dev->ltr_path value of bridge is still 1.

For following conditions, check and re-configure "LTR Mechanism Enable" bit
of bridge to make "LTR Mechanism Enable" bit match ltr_path value.
   -before configuring device's LTR for hot-remove/hot-add
   -before restoring device's DEVCTL2 register when restore device state

Signed-off-by: Mingchuang Qiao <mingchuang.q...@mediatek.com>
---
changes of v4
 -fix typo of commit message
 -rename: pci_reconfigure_bridge_ltr()->pci_bridge_reconfigure_ltr()
changes of v3
 -call pci_reconfigure_bridge_ltr() in probe.c
changes of v2
 -modify patch description
 -reconfigure bridge's LTR before restoring device DEVCTL2 register
---
 drivers/pci/pci.c   | 25 +++++++++++++++++++++++++
 drivers/pci/pci.h   |  1 +
 drivers/pci/probe.c | 13 ++++++++++---
 3 files changed, 36 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b9fecc25d213..6bf65d295331 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1437,6 +1437,24 @@ static int pci_save_pcie_state(struct pci_dev *dev)
        return 0;
 }
 
+void pci_bridge_reconfigure_ltr(struct pci_dev *dev)
+{
+#ifdef CONFIG_PCIEASPM
+       struct pci_dev *bridge;
+       u32 ctl;
+
+       bridge = pci_upstream_bridge(dev);
+       if (bridge && bridge->ltr_path) {
+               pcie_capability_read_dword(bridge, PCI_EXP_DEVCTL2, &ctl);
+               if (!(ctl & PCI_EXP_DEVCTL2_LTR_EN)) {
+                       pci_dbg(bridge, "re-enabling LTR\n");
+                       pcie_capability_set_word(bridge, PCI_EXP_DEVCTL2,
+                                                PCI_EXP_DEVCTL2_LTR_EN);
+               }
+       }
+#endif
+}
+
 static void pci_restore_pcie_state(struct pci_dev *dev)
 {
        int i = 0;
@@ -1447,6 +1465,13 @@ static void pci_restore_pcie_state(struct pci_dev *dev)
        if (!save_state)
                return;
 
+       /*
+        * Downstream ports reset the LTR enable bit when link goes down.
+        * Check and re-configure the bit here before restoring device.
+        * PCIe r5.0, sec 7.5.3.16.
+        */
+       pci_bridge_reconfigure_ltr(dev);
+
        cap = (u16 *)&save_state->cap.data[0];
        pcie_capability_write_word(dev, PCI_EXP_DEVCTL, cap[i++]);
        pcie_capability_write_word(dev, PCI_EXP_LNKCTL, cap[i++]);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 5c59365092fa..b3a5e5287cb7 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -111,6 +111,7 @@ void pci_free_cap_save_buffers(struct pci_dev *dev);
 bool pci_bridge_d3_possible(struct pci_dev *dev);
 void pci_bridge_d3_update(struct pci_dev *dev);
 void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev);
+void pci_bridge_reconfigure_ltr(struct pci_dev *dev);
 
 static inline void pci_wakeup_event(struct pci_dev *dev)
 {
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 953f15abc850..ade055e9fb58 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2132,9 +2132,16 @@ static void pci_configure_ltr(struct pci_dev *dev)
         * Complex and all intermediate Switches indicate support for LTR.
         * PCIe r4.0, sec 6.18.
         */
-       if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
-           ((bridge = pci_upstream_bridge(dev)) &&
-             bridge->ltr_path)) {
+       if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
+               pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
+                                        PCI_EXP_DEVCTL2_LTR_EN);
+               dev->ltr_path = 1;
+               return;
+       }
+
+       bridge = pci_upstream_bridge(dev);
+       if (bridge && bridge->ltr_path) {
+               pci_bridge_reconfigure_ltr(dev);
                pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
                                         PCI_EXP_DEVCTL2_LTR_EN);
                dev->ltr_path = 1;
-- 
2.18.0

Reply via email to