On Wed, Mar 03, 2021 at 05:42:18AM -0800, kan.li...@linux.intel.com wrote:
> For some old CPUs (HSW and earlier), the PEBS status in a PEBS record
> may be mistakenly set to 0. To minimize the impact of the defect, the
> commit was introduced to try to avoid dropping the PEBS record for some
> cases. It adds a check in the intel_pmu_drain_pebs_nhm(), and updates
> the local pebs_status accordingly. However, it doesn't correct the PEBS
> status in the PEBS record, which may trigger the crash, especially for
> the large PEBS.
>
> It's possible that all the PEBS records in a large PEBS have the PEBS
> status 0. If so, the first get_next_pebs_record_by_bit() in the
> __intel_pmu_pebs_event() returns NULL. The at = NULL. Since it's a large
> PEBS, the 'count' parameter must > 1. The second
> get_next_pebs_record_by_bit() will crash.
>
> Two solutions were considered to fix the crash.
> - Keep the SW workaround and add extra checks in the
> get_next_pebs_record_by_bit() to workaround the issue. The
> get_next_pebs_record_by_bit() is a critical path. The extra checks
> will bring extra overhead for the latest CPUs which don't have the
> defect. Also, the defect can only be observed on some old CPUs
> (For example, the issue can be reproduced on an HSW client, but I
> didn't observe the issue on my Haswell server machine.). The impact
> of the defect should be limit.
> This solution is dropped.
> - Drop the SW workaround and revert the commit.
> It seems that the commit never works, because the PEBS status in the
> PEBS record never be changed. The get_next_pebs_record_by_bit() only
> checks the PEBS status in the PEBS record. The record is dropped
> eventually. Reverting the commit should not change the current
> behavior.
> +++ b/arch/x86/events/intel/ds.c
> @@ -2000,18 +2000,6 @@ static void intel_pmu_drain_pebs_nhm(struct pt_regs
> *iregs, struct perf_sample_d
> continue;
> }
>
> - /*
> - * On some CPUs the PEBS status can be zero when PEBS is
> - * racing with clearing of GLOBAL_STATUS.
> - *
> - * Normally we would drop that record, but in the
> - * case when there is only a single active PEBS event
> - * we can assume it's for that event.
> - */
> - if (!pebs_status && cpuc->pebs_enabled &&
> - !(cpuc->pebs_enabled & (cpuc->pebs_enabled-1)))
> - pebs_status = cpuc->pebs_enabled;
Wouldn't something like:
pebs_status = p->status = cpus->pebs_enabled;
actually fix things without adding overhead?
