In most parts of the code the platform device is not used.
Use struct device pointer directly to reduce code size and
increase readability.
Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
---
drivers/pps/clients/pps-gpio.c | 42 +++++++++++++++-------------------
1 file changed, 19 insertions(+), 23 deletions(-)
diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c
index c6db3a3b257b..b097da5a659a 100644
--- a/drivers/pps/clients/pps-gpio.c
+++ b/drivers/pps/clients/pps-gpio.c
@@ -99,45 +99,39 @@ static void pps_gpio_echo_timer_callback(struct timer_list
*t)
gpiod_set_value(info->echo_pin, 0);
}
-static int pps_gpio_setup(struct platform_device *pdev)
+static int pps_gpio_setup(struct device *dev)
{
- struct pps_gpio_device_data *data = platform_get_drvdata(pdev);
+ struct pps_gpio_device_data *data = dev_get_drvdata(dev);
int ret;
u32 value;
- data->gpio_pin = devm_gpiod_get(&pdev->dev,
- NULL, /* request "gpios" */
- GPIOD_IN);
+ data->gpio_pin = devm_gpiod_get(dev, NULL, GPIOD_IN);
if (IS_ERR(data->gpio_pin))
- return dev_err_probe(&pdev->dev, PTR_ERR(data->gpio_pin),
+ return dev_err_probe(dev, PTR_ERR(data->gpio_pin),
"failed to request PPS GPIO\n");
- data->echo_pin = devm_gpiod_get_optional(&pdev->dev,
- "echo",
- GPIOD_OUT_LOW);
+ data->echo_pin = devm_gpiod_get_optional(dev, "echo", GPIOD_OUT_LOW);
if (IS_ERR(data->echo_pin))
- return dev_err_probe(&pdev->dev, PTR_ERR(data->echo_pin),
+ return dev_err_probe(dev, PTR_ERR(data->echo_pin),
"failed to request ECHO GPIO\n");
if (data->echo_pin) {
- ret = device_property_read_u32(&pdev->dev, "echo-active-ms",
&value);
+ ret = device_property_read_u32(dev, "echo-active-ms", &value);
if (ret) {
- dev_err(&pdev->dev,
- "failed to get echo-active-ms from FW\n");
+ dev_err(dev, "failed to get echo-active-ms from FW\n");
return ret;
}
data->echo_active_ms = value;
/* sanity check on echo_active_ms */
if (!data->echo_active_ms || data->echo_active_ms > 999) {
- dev_err(&pdev->dev,
- "echo-active-ms: %u - bad value from FW\n",
+ dev_err(dev, "echo-active-ms: %u - bad value from FW\n",
data->echo_active_ms);
return -EINVAL;
}
}
data->assert_falling_edge =
- device_property_read_bool(&pdev->dev, "assert-falling-edge");
+ device_property_read_bool(dev, "assert-falling-edge");
return 0;
}
@@ -158,24 +152,26 @@ get_irqf_trigger_flags(const struct pps_gpio_device_data
*data)
static int pps_gpio_probe(struct platform_device *pdev)
{
struct pps_gpio_device_data *data;
+ struct device *dev = &pdev->dev;
int ret;
int pps_default_params;
/* allocate space for device info */
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- platform_set_drvdata(pdev, data);
+
+ dev_set_drvdata(dev, data);
/* GPIO setup */
- ret = pps_gpio_setup(pdev);
+ ret = pps_gpio_setup(dev);
if (ret)
return -EINVAL;
/* IRQ setup */
ret = gpiod_to_irq(data->gpio_pin);
if (ret < 0) {
- dev_err(&pdev->dev, "failed to map GPIO to IRQ: %d\n", ret);
+ dev_err(dev, "failed to map GPIO to IRQ: %d\n", ret);
return -EINVAL;
}
data->irq = ret;
@@ -201,17 +197,17 @@ static int pps_gpio_probe(struct platform_device *pdev)
pps_default_params |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR;
data->pps = pps_register_source(&data->info, pps_default_params);
if (IS_ERR(data->pps)) {
- dev_err(&pdev->dev, "failed to register IRQ %d as PPS source\n",
+ dev_err(dev, "failed to register IRQ %d as PPS source\n",
data->irq);
return PTR_ERR(data->pps);
}
/* register IRQ interrupt handler */
- ret = devm_request_irq(&pdev->dev, data->irq, pps_gpio_irq_handler,
+ ret = devm_request_irq(dev, data->irq, pps_gpio_irq_handler,
get_irqf_trigger_flags(data), data->info.name, data);
if (ret) {
pps_unregister_source(data->pps);
- dev_err(&pdev->dev, "failed to acquire IRQ %d\n", data->irq);
+ dev_err(dev, "failed to acquire IRQ %d\n", data->irq);
return -EINVAL;
}
--
2.30.1
